{"id":11501,"date":"2026-01-31T08:16:41","date_gmt":"2026-01-31T08:16:41","guid":{"rendered":"https:\/\/fsxchemical.com\/?p=11501"},"modified":"2026-10-25T03:27:54","modified_gmt":"2026-10-25T03:27:54","slug":"reactive-digital-printing-pretreatment-solids-color-yield-bleeding-fabric-hand","status":"publish","type":"post","link":"https:\/\/fsxchemical.com\/ka\/blog\/reactive-digital-printing-pretreatment-solids-color-yield-bleeding-fabric-hand\/","title":{"rendered":"Pretreatment Solids Content in Reactive Digital Printing: How It Affects Color Yield, Bleeding and Fabric Hand"},"content":{"rendered":"<p class=\"wp-block-wd-paragraph wd-f550ba68\">Specify reactive pretreatment solids as a method-defined residue or a documented formulation contribution, then connect it to measured fabric add-on. Total dry residue is not automatically active polymer: urea, alkali, salts and other ingredients can contribute. The useful target is a process-specific formulation and add-on window that meets post-wash color, edge definition and fabric-hand requirements, with the required drying, fixation and washing retained.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-f231cdb5\">How Does Pretreatment Solids Content Affect Reactive Digital Printing?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f2827e97\">Pretreatment solids influence how much chemistry remains on and inside the fabric after pretreatment water is removed.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a6be5b7b\">That chemistry affects:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ink droplet spreading<\/li>\n\n\n\n<li>\u10db\u10d4\u10da\u10dc\u10d8\u10e1 \u10e8\u10d4\u10e6\u10ec\u10d4\u10d5\u10d0<\/li>\n\n\n\n<li>Surface color concentration<\/li>\n\n\n\n<li>Alkali available for reactive dye fixation<\/li>\n\n\n\n<li>Moisture behavior during steaming<\/li>\n\n\n\n<li>Drying load<\/li>\n\n\n\n<li>Wash-off demand<\/li>\n\n\n\n<li>Final fabric hand if residues remain<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-945c7bec\">The useful relationship is not:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-662c9d97\"><strong>More Solids \u2192 Better Printing.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7b5e7605\">Instead, mills should find:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7e00051b\"><strong>Minimum Stable Pretreatment Add-On That Delivers the Required Color Yield, Boundary Clarity, Fixation and Post-Wash Hand.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f24a7b67\">This requires controlling both pretreatment concentration and fabric pick-up.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-345409bc\">What Does \u201cPretreatment Solids Content\u201d Mean?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6bcb9ba4\">In reactive digital printing, \u201cpretreatment solids\u201d should be defined before data is compared.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a124463e\">It can refer to the combined nonvolatile or dry-forming components in the pretreatment liquor, such as:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Thickener or migration-control polymer<\/li>\n\n\n\n<li>Urea or another moisture-management component<\/li>\n\n\n\n<li>Alkali<\/li>\n\n\n\n<li>\u10db\u10d0\u10e0\u10d8\u10da\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>Other nonvolatile auxiliaries<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d19872fb\">This is different from:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e74c27d3\"><strong>Commercial Thickener Product Solids.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-cee2a51a\">A liquid pretreatment thickener may itself contain water, while a powder product may be mostly dry material.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a3790fc4\">Therefore, always distinguish:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Product dosage<\/li>\n\n\n\n<li>Method-defined dry residue contributed by the product, distinct from any documented active-polymer content<\/li>\n\n\n\n<li>Total pretreatment-liquor solids<\/li>\n\n\n\n<li>Actual dry chemical add-on on fabric<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-52d79854\">Bath Solids vs. Dry Chemical Add-On<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-edc4aadd\">Pretreatment bath solids alone do not tell the mill how much chemistry reaches the textile.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-eeb05a32\">A simplified relationship is:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ed15e38a\"><strong>Estimated dry add-on (%) \u2248 net wet pick-up (%) \u00d7 bath nonvolatile mass fraction.<\/strong> State the fabric reference basis and the bath-solids method. This retained-liquor estimate assumes a uniform bath and does not establish the amount of each active ingredient.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-96913460\">For controlled comparison, the exact calculation basis should be defined by the mill.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-3c3c6e40\">Two fabrics running through the same bath can receive different dry add-on if their wet pick-up differs.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-45929f0f\">Likewise, two pretreatment baths can deliver similar dry add-on if one has higher solids but lower pick-up and the other has lower solids but higher pick-up.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-853d8fbd\">This is why pretreatment solids and fabric pick-up should be evaluated together.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-396dac76\">Why Pretreatment Solids Matter<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d9f2a4af\">Conventional reactive inkjet pretreatment commonly uses polymer, alkali and moisture-management chemistry on the fabric before printing.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b3d9caf6\">The polymer helps control droplet spreading and penetration. The alkali supports reactive dye fixation during steaming. Moisture-management components help maintain the water environment needed for dye dissolution and diffusion.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6716cfc0\">Changing total solids therefore changes several process functions at once unless the formula is carefully redesigned.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-9835b604\">A useful test must distinguish:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-271cce86\"><strong>Total Solids Effect<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6f441b7e\">from:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b1730bbf\"><strong>Individual Ingredient Effect.<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-af52e6af\">What Happens When Pretreatment Solids Are Too Low?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-c24cd5c1\">When dry chemical add-on falls below the useful window, possible symptoms include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>More lateral ink spreading<\/li>\n\n\n\n<li>More face-to-back penetration<\/li>\n\n\n\n<li>Lower surface color yield<\/li>\n\n\n\n<li>Weaker edge definition<\/li>\n\n\n\n<li>Insufficient fixation chemistry<\/li>\n\n\n\n<li>Uneven shade if pretreatment becomes less uniform<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-032f2bb3\">The exact symptom depends on which part of the formula was reduced.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1ffb4288\">Too little migration-control polymer can increase spreading; too little alkali can reduce fixation; and too little moisture-management chemistry can change steaming behavior.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-aa7eb9cc\">Therefore, \u201clow solids\u201d should not be diagnosed without knowing which component changed.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-7b2f76b9\">What Happens When Pretreatment Solids Are Too High?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6b4deab9\">Excess dry add-on can create a different set of problems.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-608b5047\">\u10e8\u10d4\u10e1\u10d0\u10eb\u10da\u10dd \u10d4\u10e4\u10d4\u10e5\u10e2\u10d4\u10d1\u10d8 \u10db\u10dd\u10d8\u10ea\u10d0\u10d5\u10e1:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Heavy surface film build<\/li>\n\n\n\n<li>Longer drying demand<\/li>\n\n\n\n<li>More difficult wash-off<\/li>\n\n\n\n<li>More residual salts or polymer if washing is insufficient<\/li>\n\n\n\n<li>Potential hand deterioration<\/li>\n\n\n\n<li>Higher chemical cost<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e68ef4ec\">Very strong surface localization can also alter ink penetration, droplet coalescence and surface concentration and does not guarantee a proportional increase in color yield.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-3b711b80\">The useful pretreatment window often shows diminishing returns beyond a certain chemical add-on.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-0ca61d7a\">How Pretreatment Solids Affect Color Yield<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f815647f\">Pretreatment can increase apparent color yield by keeping more reactive ink near the visible fabric surface and by supplying the chemistry needed for fixation.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-2246b174\">Published reactive inkjet studies show that changing pretreatment-agent concentration can materially change K\/S and fixation.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-4629507c\">However, the relationship is not universally linear.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-652a136e\">Color yield can reach a plateau or fall if ink penetration becomes poor or nonuniform, excess chemistry changes wetting, alkali becomes excessive, or drying and steaming are no longer matched to the add-on.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-59688f08\">The correct target is not the maximum pretreatment-solids concentration.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-901f0e48\">It is the lowest stable add-on that reaches the required post-wash color and fixation.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-1adf22cd\">How Pretreatment Solids Affect Bleeding and Edge Definition<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6d89a294\">Polymer pretreatment can form a surface-controlling layer that limits uncontrolled droplet spreading.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f83fea0d\">If polymer add-on is too low:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Droplets can move laterally through fiber \/ yarn pathways.<\/li>\n\n\n\n<li>Fine lines can widen.<\/li>\n\n\n\n<li>Color-to-color boundaries can become less clear.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d7a1421e\">Increasing pretreatment polymer can improve boundary control up to a useful range.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e411d106\">But excessive polymer film can create different surface wetting, slower liquid absorption and more residue to remove.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6104980d\">Evaluate bleeding together with color yield and wash-off.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-32f0abce\">Surface Localization vs. Excess Penetration<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-13bbe7a0\">Reactive ink must contact cellulose and fix during steaming, but excessive depth is not always useful for visual color.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-dc0b75af\">Too much penetration can reduce surface color concentration and make the face appear weaker even when total ink usage is unchanged.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7696b2fe\">Pretreatment solids can help control droplet residence near the surface, lateral spreading and through-thickness movement.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-825d6215\">For every solids level, compare:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Face-side K\/S or approved shade<\/li>\n\n\n\n<li>Reverse-side show-through<\/li>\n\n\n\n<li>\u10d6\u10e3\u10e1\u10e2\u10d8 \u10d2\u10d0\u10dc\u10e1\u10d0\u10d6\u10e6\u10d5\u10e0\u10d0<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-2a8899d7\">Do not optimize color without observing penetration.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-2b6cc064\">How Pretreatment Solids Affect Fabric Hand<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f0ce2158\">Fabric hand requires careful interpretation in reactive digital printing because pretreatment is followed by steaming and washing.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-5a14e995\">Many conventional water-soluble pretreatment components are intended to be removed during wash-off.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d885a33e\">\u10d0\u10db\u10d8\u10e2\u10dd\u10db:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-90a3b6fa\"><strong>High Pretreatment Solids \u2260 Automatically Permanent Hard Hand.<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6f89d520\">The final hand depends on:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Polymer chemistry<\/li>\n\n\n\n<li>Pretreatment add-on<\/li>\n\n\n\n<li>Dye fixation<\/li>\n\n\n\n<li>Wash-off efficiency<\/li>\n\n\n\n<li>Residual polymer \/ salts \/ unfixed dye<\/li>\n\n\n\n<li>Fabric structure<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7d815896\">Some pretreatment polymers wash out more readily than others.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-aa57838b\">Polymer coatings that remain more strongly on the textile can contribute to harder post-wash hand.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-4806dc4a\">Therefore, judge hand only after the complete production wash-off and conditioning step.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-8c45e9de\">Wash-Off Efficiency and Residual Solids<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e4948dd0\">Reactive printing wash-off removes hydrolyzed or unfixed dye, residual alkali, urea or other water-soluble components, and water-soluble pretreatment residue.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-14582b4e\">If pretreatment add-on is increased, wash-off demand can also increase.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-adf645c2\">Insufficient washing can leave:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Harsh hand<\/li>\n\n\n\n<li>Residual surface polymer<\/li>\n\n\n\n<li>\u10db\u10d0\u10e0\u10d8\u10da\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>Color contamination in white areas<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-abab0972\">When comparing solids levels, use one standardized washing sequence first.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-227461d3\">If a high-solids sample only becomes acceptable after much more intensive washing, include that water, energy and time in the commercial decision.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-e205f3e3\">Why Polymer Chemistry Matters as Much as Solids<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e6cec1db\">Two pretreatment polymers at the same dry add-on can behave differently.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-60be338a\">Important differences include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u10f0\u10d8\u10d3\u10e0\u10d0\u10e2\u10d0\u10ea\u10d8\u10d0<\/li>\n\n\n\n<li>\u10e4\u10d8\u10da\u10db\u10d8\u10e1 \u10e4\u10dd\u10e0\u10db\u10d8\u10e0\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>Ink-drop confinement<\/li>\n\n\n\n<li>Reactive-dye compatibility<\/li>\n\n\n\n<li>Washability<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ca358f9a\">Sodium alginate is widely used in reactive printing because of its dye compatibility and good wash-out behavior.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-15dbbe00\">Other cellulose derivatives and synthetic polymers can also improve inkjet definition, but their post-wash behavior must be verified.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-4cd26192\">\u10d0\u10db\u10d8\u10e2\u10dd\u10db:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ec51240b\"><strong>Same Solids Add-On \u2260 Same Printing Result or Hand.<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-7e25134d\">Thickener \/ Migration-Control Polymer<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-dd8b1cb8\">The thickener component is usually the most direct solids variable affecting ink migration.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-46a632bd\">Changing thickener dosage can change bath rheology, fabric surface film, droplet spreading, penetration and wash-off load.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-406caeb4\">Research on reactive cotton inkjet pretreatment has shown that thickener concentration can have an optimum range rather than a simple \u201cmore is better\u201d relationship.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-5ffa30b5\">For practical development, build a dosage ladder around the current commercial level.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-78abf6da\">Keep alkali, urea, pick-up, drying and steaming constant in the first test.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-a227ccd4\">Urea and Moisture-Management Solids<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-640adb21\">Urea can represent a large part of the dry chemical load in conventional reactive pretreatment.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d431e0d1\">Its function is different from thickener.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ee4cffd5\">It primarily supports moisture and dye-solubility conditions during fixation.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-375ebca9\">Changing urea level can alter total solids, drying demand, moisture behavior during steaming and wash-off load.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-95fffd8a\">Modern urea-reduced and urea-free approaches also exist, showing that the required moisture-management route is process-specific.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e8d8e9f9\">Therefore, do not reduce total solids by cutting urea unless fixation and color are revalidated.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-cb402d74\">Alkali Add-On and Fixation Chemistry<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-88ff7dfe\">Alkali is required for reactive dye fixation, but excessive alkali is not an advantage.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f6284ecb\">Pretreatment-solids optimization should keep track of:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Alkali concentration<\/li>\n\n\n\n<li>\u10e1\u10d5\u10d4\u10da\u10d0\u10d3 \u10d0\u10e6\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>Actual alkali add-on<\/li>\n\n\n\n<li>Final fabric \/ pretreatment pH where controlled<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-442a9a34\">If the whole pretreatment formula is diluted to reduce solids, alkali add-on can also fall.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-08cd5075\">The resulting lower K\/S may then be caused by fixation loss rather than poor migration control.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f221a841\">Separate thickener solids from fixation chemistry during troubleshooting.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-b564243d\">Salts and Other Nonvolatile Auxiliaries<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-777dd23e\">Some pretreatment systems also contain salts, anti-reducing agents, cationic components or other auxiliaries.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1dde3c11\">These materials contribute to total dry add-on even if they do not contribute to bath viscosity.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ceb0be8d\">They can affect conductivity or ionic environment, polymer behavior, drying and wash-off.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a99c31e4\">Do not use bath viscosity as a proxy for total solids.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-64bdc6cd\">A low-viscosity pretreatment can still contain a high level of dissolved solids.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-f1b691c5\">Wet Pick-Up Multiplies the Effect of Bath Solids<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f0f9e02a\">Pick-up is the bridge between pretreatment concentration and fabric chemical load.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b2f21107\">For a simple gravimetric check:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a7a67840\"><strong>Wet Pick-Up (%) = (Wet Fabric Weight \u2212 Dry Fabric Weight) \u00f7 Dry Fabric Weight \u00d7 100<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-258b8cf6\">If bath solids remain constant:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e68d2cba\"><strong>Higher Pick-Up \u2192 Higher Chemical Add-On<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e4108fad\">and vice versa.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-0c5e1142\">This is why solids optimization cannot be separated from padding pressure, nip condition, fabric absorbency and application route.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b4e2b93a\">For broader process logic, see <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%91%e1%83%9a%e1%83%9d%e1%83%92%e1%83%98\/textile-printing-thickener-testing-parameters\/\">Textile Printing Thickener Testing Parameters<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-1070e88c\">Drying Load and Solids Migration<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-37ee776d\">Higher pretreatment add-on usually means more water and\/or more dissolved or dispersed material must be managed during drying.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e8a45c12\">Drying can change the final pretreatment distribution through water migration, surface concentration, polymer film formation and salt redistribution.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8253add0\">As solids and pick-up change, the current dryer setting may no longer produce the same residual moisture, surface chemistry or fabric dimensional condition.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-2fda2ca4\">Therefore, after a solids change is selected, drying should be revalidated.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-a2dbf728\">Residual Moisture Before Printing<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b7393950\">Pretreatment solids and residual moisture are related but different variables.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-bde3341b\">A fabric can have high solids \/ low residual moisture, high solids \/ high residual moisture, low solids \/ low residual moisture, or low solids \/ high residual moisture.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f7e8f1ef\">These conditions can give different ink spreading and fixation behavior.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b5a70e16\">Do not use \u201cdry to touch\u201d as the only production control.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7ffc9591\">Where residual moisture is important, measure or standardize it separately.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-fb16b6d0\">Fabric Structure and Absorbency<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7c11c15a\">The same pretreatment solids can behave differently on lightweight knit, dense woven, mercerized cotton, viscose or lyocell because fabric structure changes wet pick-up, penetration, surface area and drying.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6eeffdad\">A high-solids formula that gives excellent surface localization on one fabric may create excessive surface film on another.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d08dd1f1\">Approve solids by fabric family and construction where necessary.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-8a354089\">Cotton vs. Viscose vs. Lyocell<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-0b018893\">Cotton, viscose and lyocell all support reactive dye chemistry but differ in swelling and liquid transport.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ed368973\">Therefore, the same bath solids can create different actual results because pick-up, penetration, drying and residual moisture differ.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-489974f2\">Do not define one universal \u201ccellulosic pretreatment solids\u201d specification.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-242b4000\">Use one controlled liquor first, measure actual add-on, and then create substrate-specific working windows.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-b5a0fe9c\">Light vs. Dark Reactive Ink Loads<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b416c4e5\">A pretreatment solids level that works for light shades may not be the best stress condition.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-66c21ca6\">Dark or high-ink-load areas challenge droplet coalescence, bleeding control, surface localization, fixation chemistry and wash-off.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-737b68dd\">For qualification, include fine lines \/ small text, medium-tone blocks and high-ink-load dark areas.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-08c38a12\">This reveals whether the pretreatment window remains stable across the real design range.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-8040dbe5\">Steaming and Fixation<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-832aa560\">Pretreatment solids should never be optimized independently from steaming.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-3ecc30f0\">During steaming, reactive dye fixation depends on available alkali, moisture, heat, time and dye \/ cellulose accessibility.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-4b37da3c\">If solids are reduced by cutting alkali or moisture-management chemistry, the print can lose fixation even if bleeding improves.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-29a9822f\">If solids are increased substantially, the established steaming condition may also need review.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ba26e30c\">Keep steaming fixed during the first solids trial, then optimize only if needed.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-52e85bde\">Do Not Change Solids, Pick-Up and Drying at the Same Time<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d3582bee\">One common development mistake is to change pretreatment concentration, padding pressure and drying temperature in one trial.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a3e72c07\">If the result improves, the mill cannot identify why.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-838917a8\">Use a staged method:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-f1c2809f\"><strong>Stage 1: Solids Concentration<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-0c4cdc73\"><strong>Stage 2: Pick-Up<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8622d937\"><strong>Stage 3: Drying \/ Residual Moisture<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-5904160a\"><strong>Stage 4: Steaming<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-cad0f943\">This produces a much more reliable production specification.<\/p>\n\n\n\n<h3>Reconcile a Solids Result with the Formulation Ledger<\/h3>\n<p>Record the final bath mass and the commercial mass of each ingredient added. Where the supplier provides a relevant nonvolatile or polymer-content value, retain its basis and test method. Keep unknown composition explicit; a total-solids result cannot resolve an undisclosed formulation.<\/p>\n<div style=\"overflow-x:auto\"><table><thead><tr><th>Result or record<\/th><th>Useful interpretation<\/th><th>Do not infer<\/th><\/tr><\/thead><tbody>\n<tr><td>Commercial-product dose<\/td><td>Mass of the supplied product per final bath mass.<\/td><td>The same mass of active polymer in a powder, solution and compound product.<\/td><\/tr>\n<tr><td>Bath residue under a stated method<\/td><td>Material remaining after that preparation, drying and weighing procedure.<\/td><td>Pure thickener content, or all original solids if the method causes component loss or reaction.<\/td><\/tr>\n<tr><td>Component ledger<\/td><td>Known polymer, alkali, moisture-management and other contributions kept distinct.<\/td><td>That equal total residue gives equal ionic balance, fixation conditions or ink control.<\/td><\/tr>\n<tr><td>Treated-fabric dry-mass increment<\/td><td>An application check using comparable specimen basis and a suitable blank.<\/td><td>Distribution through the fabric, the amount of each active component or final washability.<\/td><\/tr>\n<\/tbody><\/table><\/div>\n<p>When testing a polymer change, keep the remaining final-bath composition defined and balance water deliberately. If a commercial candidate carries other unknown ingredients, label it a complete-product comparison rather than an isolated polymer experiment. Verify that the residue method is suitable for the ingredients, including materials that may volatilise, decompose or react during heating; do not invent one universal oven condition for every formulation.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-6c494fad\">Build a Pretreatment-Solids Ladder<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-34f55383\">Prepare several controlled pretreatment levels around the current production condition.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8ea45085\">A useful test design can include lower solids, current reference, moderately higher solids and a high stress point where technically justified.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1a773c47\">Keep fabric, pick-up, drying, ink, steaming and washing constant first.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-2fb97cce\">For every sample, record:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Bath solids<\/li>\n\n\n\n<li>\u10e1\u10d5\u10d4\u10da\u10d0\u10d3 \u10d0\u10e6\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>Calculated dry add-on<\/li>\n\n\n\n<li>K\/S or shade<\/li>\n\n\n\n<li>Bleeding \/ boundary clarity<\/li>\n\n\n\n<li>\u10e8\u10d4\u10e6\u10ec\u10d4\u10d5\u10d0<\/li>\n\n\n\n<li>Post-wash hand<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d270c2ee\">Do not assume the highest-solids point is the best.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-a96a0f7d\">Build a Solids \u00d7 Pick-Up Matrix<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Pretreatment Condition<\/th><th>Lower Pick-Up<\/th><th>Reference Pick-Up<\/th><th>Higher Pick-Up<\/th><\/tr><\/thead><tbody><tr><td>Lower solids<\/td><td>\u10e2\u10d4\u10e1\u10e2\u10d8<\/td><td>\u10e2\u10d4\u10e1\u10e2\u10d8<\/td><td>Optional<\/td><\/tr><tr><td>Reference solids<\/td><td>\u10e2\u10d4\u10e1\u10e2\u10d8<\/td><td>Reference<\/td><td>\u10e2\u10d4\u10e1\u10e2\u10d8<\/td><\/tr><tr><td>Higher solids<\/td><td>Optional<\/td><td>\u10e2\u10d4\u10e1\u10e2\u10d8<\/td><td>Stress point<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-38df11e5\">This matrix reveals whether a problem comes from bath concentration, fabric pick-up or total dry add-on rather than treating all three as one variable.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-40bd897b\">Calculate Dry Chemical Add-On<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-bb924a7f\">For process comparison, define one internal calculation method.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8cd5bb24\">A simplified estimate is:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-de203759\"><strong>Estimated dry add-on (% on the stated fabric basis) \u2248 net wet-pick-up fraction \u00d7 bath nonvolatile mass fraction \u00d7 100.<\/strong> Do not multiply two percentage numbers as though both were fractions. Check the estimate against a suitable treated-fabric\/blank method where needed.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-57307357\">Example calculations should use the mill\u2019s actual concentration basis and measured pick-up.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6101bb46\">Do not mix % w\/w of bath, g\/L and % on weight of fabric without conversion.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-705f7338\">Dry add-on is often the most useful bridge between laboratory formula and production fabric.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-f447f63b\">Build a Color \/ Bleeding \/ Hand Response Map<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Dry Add-On<\/th><th>\u10e4\u10d4\u10e0\u10d8\u10e1 \u10d2\u10d0\u10db\u10dd\u10e1\u10d0\u10d5\u10d0\u10da\u10d8<\/th><th>Bleeding \/ Definition<\/th><th>\u10e8\u10d4\u10e6\u10ec\u10d4\u10d5\u10d0<\/th><th>Post-Wash Hand<\/th><\/tr><\/thead><tbody><tr><td>Low<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><\/tr><tr><td>Reference<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><\/tr><tr><td>Higher<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><td>\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-64e6cf08\">The optimum is where all required outputs pass.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e10c525f\">It may not be the condition with the absolute highest K\/S.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a67513bb\">A small K\/S gain can be commercially unattractive if it requires much more pretreatment, longer drying, more wash-off or worse hand.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-6ff25537\">Recommended Laboratory Workflow<\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Define the current pretreatment formula and concentration basis.<\/strong><\/li>\n\n\n\n<li><strong>Measure or calculate total pretreatment solids.<\/strong><\/li>\n\n\n\n<li><strong>Use one fabric lot and one controlled application method.<\/strong><\/li>\n\n\n\n<li><strong>Build a pretreatment-solids ladder.<\/strong><\/li>\n\n\n\n<li><strong>Measure wet pick-up for every sample.<\/strong><\/li>\n\n\n\n<li><strong>Calculate dry chemical add-on.<\/strong><\/li>\n\n\n\n<li><strong>Dry under identical conditions first.<\/strong><\/li>\n\n\n\n<li><strong>Print fine details, medium tones and a high-ink-load area.<\/strong><\/li>\n\n\n\n<li><strong>Steam under one controlled condition.<\/strong><\/li>\n\n\n\n<li><strong>Wash \/ soap identically.<\/strong><\/li>\n\n\n\n<li><strong>Compare K\/S, bleeding, penetration, fixation where available and post-wash hand.<\/strong><\/li>\n\n\n\n<li><strong>Then optimize pick-up, drying or steaming only where the response map shows a need.<\/strong><\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1c819442\">For grade matching, review <a href=\"https:\/\/fsxchemical.com\/ka\/product\/%e1%83%aa%e1%83%98%e1%83%a4%e1%83%a0%e1%83%a3%e1%83%9a%e1%83%98-%e1%83%91%e1%83%94%e1%83%ad%e1%83%93%e1%83%95%e1%83%98%e1%83%a1-%e1%83%9e%e1%83%90%e1%83%a1%e1%83%a2%e1%83%90\/\">\u10d3\u10d8\u10d2\u10d8\u10e2\u10d0\u10da\u10e3\u10e0\u10d8 \u10e2\u10d4\u10e5\u10e1\u10e2\u10d8\u10da\u10d8\u10e1 \u10d1\u10d4\u10ed\u10d3\u10d5\u10d8\u10e1 \u10ec\u10d8\u10dc\u10d0\u10e1\u10ec\u10d0\u10e0\u10d8 \u10d3\u10d0\u10db\u10e3\u10e8\u10d0\u10d5\u10d4\u10d1\u10d0<\/a> \u10d3\u10d0 <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%9b%e1%83%9d%e1%83%9b%e1%83%a1%e1%83%90%e1%83%ae%e1%83%a3%e1%83%a0%e1%83%94%e1%83%91%e1%83%90\/%e1%83%a8%e1%83%94%e1%83%a1%e1%83%90%e1%83%91%e1%83%90%e1%83%9b%e1%83%98%e1%83%a1%e1%83%98-%e1%83%9c%e1%83%98%e1%83%9b%e1%83%a3%e1%83%a8%e1%83%94%e1%83%91%e1%83%98\/\">\u10dc\u10d8\u10db\u10e3\u10e8\u10d4\u10d1\u10d8 \u10d3\u10d0 \u10e8\u10d4\u10e1\u10d0\u10d1\u10d0\u10db\u10d8\u10e1\u10dd\u10d1\u10d0<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-cd63ac6d\">\u10ec\u10d0\u10e0\u10db\u10dd\u10d4\u10d1\u10d8\u10e1 \u10e1\u10d0\u10ea\u10d3\u10d4\u10da\u10d8 \u10d3\u10d0\u10db\u10e2\u10d9\u10d8\u10ea\u10d4\u10d1\u10d0<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6cbff345\">After the laboratory working window is identified, run the best condition on the actual pretreatment line.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-6d3cbcd2\">\u10e9\u10d0\u10dc\u10d0\u10ec\u10d4\u10e0\u10d8:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Fabric composition \/ construction<\/li>\n\n\n\n<li>Pretreatment product \/ batch<\/li>\n\n\n\n<li>Total bath solids<\/li>\n\n\n\n<li>Bath pH<\/li>\n\n\n\n<li>\u10e1\u10d5\u10d4\u10da\u10d0\u10d3 \u10d0\u10e6\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>Calculated \/ measured dry add-on<\/li>\n\n\n\n<li>Drying temperature \/ speed<\/li>\n\n\n\n<li>Residual moisture if monitored<\/li>\n\n\n\n<li>Ink \/ print mode<\/li>\n\n\n\n<li>\u10d2\u10d0\u10dd\u10e0\u10d7\u10e5\u10da\u10d4\u10d1\u10d8\u10e1 \u10de\u10d8\u10e0\u10dd\u10d1\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>Washing conditions<\/li>\n\n\n\n<li>Color \/ K\/S<\/li>\n\n\n\n<li>Bleeding \/ edge definition<\/li>\n\n\n\n<li>\u10e8\u10d4\u10e6\u10ec\u10d4\u10d5\u10d0<\/li>\n\n\n\n<li>Post-wash hand<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-7cd3a5b3\">Approve a solids \/ add-on working window, not one isolated bath concentration.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-21bc90e0\">Common Pretreatment-Solids Mistakes<\/h2>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-88e5f7d8\">1. Calling Thickener Dosage \u201cTotal Solids\u201d<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-337ca110\">Alkali, urea, salts and other auxiliaries can contribute significant dry add-on.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-69f37952\">2. Comparing Bath Concentration Without Measuring Pick-Up<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-3ac2a46d\">The same bath can deliver different chemical loading to different fabrics or padder settings.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-350bccfc\">3. Assuming More Solids Always Give Higher Color Yield<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-3f0f61f3\">Color can plateau or fall if wetting, penetration, drying or fixation becomes unbalanced.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-f8433830\">4. Assuming High Solids Always Cause Permanent Hard Hand<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-235248a2\">Final hand depends strongly on polymer chemistry and wash-off efficiency.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-55feccb5\">5. Reducing Total Solids by Cutting Alkali<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-74d61c8d\">Lower fixation can be mistaken for a migration-control problem.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-0c922a3f\">6. Reducing Urea Without Rechecking Steaming<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-743501ab\">Moisture-management demand must be validated rather than assumed.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-2fedb572\">7. Changing Solids and Pick-Up Together<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-36cab2d4\">The true cause of the result becomes difficult to identify.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-117b0a61\">8. Judging Hand Before Washing<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-352b1f4d\">Reactive pretreatment should be assessed after the complete wash-off and conditioning route.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-40c1f740\">\u10de\u10e0\u10dd\u10d1\u10da\u10d4\u10db\u10d4\u10d1\u10d8\u10e1 \u10d0\u10e6\u10db\u10dd\u10e4\u10ee\u10d5\u10e0\u10d0<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>\u10d3\u10d0\u10e4\u10d8\u10e5\u10e1\u10d8\u10e0\u10d4\u10d1\u10e3\u10da\u10d8 \u10de\u10e0\u10dd\u10d1\u10da\u10d4\u10db\u10d0<\/th><th>\u10de\u10d8\u10e0\u10d5\u10d4\u10da\u10d8 \u10e8\u10d4\u10e1\u10d0\u10db\u10dd\u10ec\u10db\u10d4\u10d1\u10d4\u10da\u10d8 \u10ea\u10d5\u10da\u10d0\u10d3\u10d4\u10d1\u10d8<\/th><th>\u10dc\u10e3 \u10d8\u10d5\u10d0\u10e0\u10d0\u10e3\u10d3\u10d4\u10d1<\/th><\/tr><\/thead><tbody><tr><td>Low color and heavy bleeding<\/td><td>Polymer add-on, pick-up, drying, ink load<\/td><td>More alkali is the first fix<\/td><\/tr><tr><td>Color improves but hand worsens<\/td><td>Total dry add-on, polymer chemistry, wash-off<\/td><td>All extra solids remain permanently<\/td><\/tr><tr><td>High solids give no further K\/S gain<\/td><td>Fixation, penetration, saturation \/ plateau<\/td><td>More pretreatment will continue improving color<\/td><\/tr><tr><td>Same bath gives different results by fabric<\/td><td>Wet pick-up, absorbency, GSM, construction<\/td><td>The bath formula defines actual add-on<\/td><\/tr><tr><td>Lower-solids trial loses fixation<\/td><td>Alkali \/ moisture-management add-on<\/td><td>Thickener reduction alone caused the loss<\/td><\/tr><tr><td>Post-wash fabric feels harsh<\/td><td>Polymer washability, wash-off, residual salts \/ dye<\/td><td>High pre-print viscosity is the cause<\/td><\/tr><tr><td>Edges are sharp but surface feels heavily coated<\/td><td>Polymer add-on, pick-up, solids concentration<\/td><td>Maximum localization is always best<\/td><\/tr><tr><td>Lab result works but production bleeds<\/td><td>Pick-up drift, bath solids drift, drying \/ moisture<\/td><td>The pretreatment grade changed<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-a1899cce\">\u10e1\u10d0\u10d4\u10e0\u10d7\u10dd \u10e6\u10d8\u10e0\u10d4\u10d1\u10e3\u10da\u10d4\u10d1\u10d0 \u10d2\u10d0\u10db\u10dd\u10e7\u10d4\u10dc\u10d4\u10d1\u10d8\u10e1\u10d0\u10e1<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8bfb9e39\">Pretreatment-solids optimization should include more than chemical price.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-56e57da3\">\u10e1\u10d0\u10e1\u10d0\u10e0\u10d2\u10d4\u10d1\u10da\u10dd \u10db\u10dd\u10d3\u10d4\u10da\u10d8\u10d0:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-8b1cabf0\"><strong>Cost per accepted m\u00b2 = total non-overlapping in-scope run cost \u00f7 accepted finished-fabric area.<\/strong> Convert actual chemical, ink, energy, labour, post-treatment and additional disposal expenses into one currency. Pick-up and add-on determine consumption; they are not separate monetary cost lines. Include resources used in rejected fabric and rework without counting their underlying materials twice.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-dedda280\">A lower-solids pretreatment can be economically better if it maintains color, controls bleeding, reduces drying load and reduces wash-off demand.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1a9c72f1\">But it can become more expensive if color yield falls, ink consumption must rise, bleeding increases or fixation falls.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-457afe4f\">Compare cost per acceptable printed meter rather than pretreatment cost per kilogram.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-c847462c\">\u10e0\u10d0 \u10d8\u10dc\u10e4\u10dd\u10e0\u10db\u10d0\u10ea\u10d8\u10d0 \u10e3\u10dc\u10d3\u10d0 \u10d2\u10d0\u10e3\u10d2\u10d6\u10d0\u10d5\u10dc\u10dd\u10d7 \u10db\u10dd\u10db\u10ec\u10dd\u10d3\u10d4\u10d1\u10d4\u10da\u10e1?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a261b49a\">For useful pretreatment-solids matching, provide:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u10e0\u10d4\u10d0\u10e5\u10e2\u10d8\u10e3\u10da\u10d8 \u10db\u10d4\u10da\u10dc\u10d8\u10e1 \/ \u10e1\u10d0\u10e6\u10d4\u10d1\u10d0\u10d5\u10d8\u10e1 \u10e1\u10d8\u10e1\u10e2\u10d4\u10db\u10d0<\/li>\n\n\n\n<li>Fabric composition and construction<\/li>\n\n\n\n<li>\u10db\u10d8\u10db\u10d3\u10d8\u10dc\u10d0\u10e0\u10d4 \u10ec\u10d8\u10dc\u10d0\u10e1\u10ec\u10d0\u10e0\u10d8 \u10d3\u10d0\u10db\u10e3\u10e8\u10d0\u10d5\u10d4\u10d1\u10d8\u10e1 \u10de\u10e0\u10dd\u10d3\u10e3\u10e5\u10e2\u10d8 \/ TDS<\/li>\n\n\n\n<li>Thickener or migration-control dosage<\/li>\n\n\n\n<li>Alkali type \/ dosage<\/li>\n\n\n\n<li>\u10db\u10dd\u10d7\u10d0\u10e3\u10e0\u10d8\u10d0 \u10d0\u10dc \u10e2\u10d4\u10dc\u10d8\u10d0\u10dc\u10dd\u10d1\u10d8\u10e1 \u10db\u10d0\u10e0\u10d7\u10d5\u10d8\u10e1 \u10d9\u10dd\u10db\u10de\u10dd\u10dc\u10d4\u10dc\u10e2\u10d8<\/li>\n\n\n\n<li>Other salts \/ auxiliaries<\/li>\n\n\n\n<li>Total pretreatment concentration basis<\/li>\n\n\n\n<li>\u10e1\u10d5\u10d4\u10da\u10d0\u10d3 \u10d0\u10e6\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>\u10d2\u10d0\u10db\u10e8\u10e0\u10dd\u10d1\u10d8\u10e1 \u10de\u10d8\u10e0\u10dd\u10d1\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>\u10dc\u10d0\u10e0\u10e9\u10d4\u10dc\u10d8 \u10dc\u10d4\u10e1\u10e2\u10d8, \u10d7\u10e3 \u10d0\u10e0\u10e1\u10d4\u10d1\u10dd\u10d1\u10e1<\/li>\n\n\n\n<li>\u10d2\u10d0\u10dd\u10e0\u10d7\u10e5\u10da\u10d4\u10d1\u10d8\u10e1 \u10de\u10d8\u10e0\u10dd\u10d1\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>\u10e1\u10d0\u10e0\u10d4\u10ea\u10ee\u10d8 \u10db\u10d0\u10e0\u10e8\u10e0\u10e3\u10e2\u10d8<\/li>\n\n\n\n<li>Main issue: color, bleeding, penetration, wash-off or hand<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-5cf4b579\">FSX Chemical-\u10e1 \u10e8\u10d4\u10e3\u10eb\u10da\u10d8\u10d0 \u10d0\u10db \u10d8\u10dc\u10e4\u10dd\u10e0\u10db\u10d0\u10ea\u10d8\u10d8\u10e1 \u10d2\u10d0\u10db\u10dd\u10e7\u10d4\u10dc\u10d4\u10d1\u10d0 \u10db\u10d4\u10e8\u10d5\u10d4\u10dd\u10d1\u10d8\u10d7 <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%9b%e1%83%9d%e1%83%9b%e1%83%a1%e1%83%90%e1%83%ae%e1%83%a3%e1%83%a0%e1%83%94%e1%83%91%e1%83%90\/%e1%83%a8%e1%83%94%e1%83%a1%e1%83%90%e1%83%91%e1%83%90%e1%83%9b%e1%83%98%e1%83%a1%e1%83%98-%e1%83%9c%e1%83%98%e1%83%9b%e1%83%a3%e1%83%a8%e1%83%94%e1%83%91%e1%83%98\/\">\u10dc\u10d8\u10db\u10e3\u10e8\u10d4\u10d1\u10d8 \u10d3\u10d0 \u10e8\u10d4\u10e1\u10d0\u10d1\u10d0\u10db\u10d8\u10e1\u10dd\u10d1\u10d0<\/a> to define a controlled solids \/ add-on comparison.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-dfc8f25e\">\u10db\u10d8\u10db\u10dd\u10ee\u10d8\u10da\u10d5\u10d0 <a href=\"https:\/\/fsxchemical.com\/ka\/product\/%e1%83%aa%e1%83%98%e1%83%a4%e1%83%a0%e1%83%a3%e1%83%9a%e1%83%98-%e1%83%91%e1%83%94%e1%83%ad%e1%83%93%e1%83%95%e1%83%98%e1%83%a1-%e1%83%9e%e1%83%90%e1%83%a1%e1%83%a2%e1%83%90\/\">\u10d3\u10d8\u10d2\u10d8\u10e2\u10d0\u10da\u10e3\u10e0\u10d8 \u10e2\u10d4\u10e5\u10e1\u10e2\u10d8\u10da\u10d8\u10e1 \u10d1\u10d4\u10ed\u10d3\u10d5\u10d8\u10e1 \u10ec\u10d8\u10dc\u10d0\u10e1\u10ec\u10d0\u10e0\u10d8 \u10d3\u10d0\u10db\u10e3\u10e8\u10d0\u10d5\u10d4\u10d1\u10d0<\/a>, <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%92%e1%83%90%e1%83%9c%e1%83%90%e1%83%aa%e1%83%ae%e1%83%90%e1%83%93%e1%83%94%e1%83%91%e1%83%98\/\">\u10e2\u10d4\u10e5\u10e1\u10e2\u10d8\u10da\u10d8\u10e1 \u10d1\u10d4\u10ed\u10d3\u10d5\u10d8\u10e1 \u10d2\u10d0\u10db\u10dd\u10e7\u10d4\u10dc\u10d4\u10d1\u10d8\u10e1 \u10e1\u10e4\u10d4\u10e0\u10dd\u10d4\u10d1\u10d8<\/a> \u10d3\u10d0 <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%91%e1%83%9a%e1%83%9d%e1%83%92%e1%83%98\/reactive-disperse-pigment-digital-textile-printing-thickener\/\">\u10e2\u10d4\u10e5\u10e1\u10e2\u10d8\u10da\u10d8\u10e1 \u10d1\u10d4\u10ed\u10d3\u10d5\u10d8\u10e1 \u10d2\u10d0\u10e1\u10d0\u10e1\u10e5\u10d4\u10da\u10d4\u10d1\u10da\u10d4\u10d1\u10d8 \u10de\u10e0\u10dd\u10ea\u10d4\u10e1\u10d8\u10e1 \u10db\u10d8\u10ee\u10d4\u10d3\u10d5\u10d8\u10d7<\/a> \u10e3\u10e4\u10e0\u10dd \u10e4\u10d0\u10e0\u10d7\u10dd \u10db\u10d0\u10e0\u10e8\u10e0\u10e3\u10e2\u10d4\u10d1\u10d8\u10e1 \u10d0\u10e0\u10e9\u10d4\u10d5\u10d0\u10dc\u10d8\u10e1\u10d7\u10d5\u10d8\u10e1.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-50237583\">How Should a Mill Set Pretreatment Solids for Reactive Digital Printing?<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-687f8923\">\u10de\u10e0\u10d0\u10e5\u10e2\u10d8\u10d9\u10e3\u10da\u10d8 \u10db\u10d0\u10e0\u10d7\u10d5\u10d8\u10e1 \u10ef\u10d0\u10ed\u10d5\u10d8 \u10d0\u10e0\u10d8\u10e1:<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-ae4193ac\"><strong>Define Total Bath Solids \u2192 Measure Wet Pick-Up \u2192 Calculate Dry Add-On \u2192 Print \/ Steam \/ Wash \u2192 Compare Color \/ Bleeding \/ Penetration \/ Hand \u2192 Adjust One Variable at a Time \u2192 Lock Solids + Pick-Up Working Window<\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-867949fd\">\u10eb\u10d8\u10e0\u10d8\u10d7\u10d0\u10d3\u10d8 \u10de\u10e0\u10d8\u10dc\u10ea\u10d8\u10de\u10d4\u10d1\u10d8\u10d0:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Pretreatment solids means more than thickener dosage; all nonvolatile or dry-forming pretreatment components should be considered.<\/strong><\/li>\n\n\n\n<li><strong>Bath concentration does not define fabric chemical load unless wet pick-up is also controlled.<\/strong><\/li>\n\n\n\n<li><strong>Low solids can reduce surface control or fixation chemistry, while excessive solids can increase drying, wash-off and residual-hand risk.<\/strong><\/li>\n\n\n\n<li><strong>Color yield can improve with pretreatment add-on but does not increase indefinitely; penetration, wetting, alkali and steaming must remain balanced.<\/strong><\/li>\n\n\n\n<li><strong>Final hand should be judged after reactive wash-off because polymer chemistry and residue removal determine what remains on the fabric.<\/strong><\/li>\n\n\n\n<li><strong>The best pretreatment is the lowest dry-add-on window that delivers the required color yield, bleeding control, fixation and post-wash hand at the lowest practical Total Cost in Use.<\/strong><\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-3fb6394a\">\u10ee\u10e8\u10d8\u10e0\u10d0\u10d3 \u10d3\u10d0\u10e1\u10db\u10e3\u10da\u10d8 \u10d9\u10d8\u10d7\u10ee\u10d5\u10d4\u10d1\u10d8<\/h2>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-50f71d93\">1. What does pretreatment solids content mean in reactive digital printing?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-955319e7\">It refers to the dry or nonvolatile components in the pretreatment liquor, such as migration-control polymer, alkali, urea or other moisture-management chemicals, salts and other auxiliaries.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-e6e2badb\">2. Is pretreatment solids the same as thickener solids?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-77a2b969\">No. Thickener is only one contributor. Total pretreatment solids can include several nonvolatile ingredients.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-d1f4d229\">3. Why does higher pretreatment solids sometimes increase color yield?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b2a6e21a\">More polymer can localize ink near the surface and more fixation chemistry may be carried by the fabric, but the response is not universally linear.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-2800a6c4\">4. Can too much pretreatment solids reduce color performance?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-c21f7aea\">Yes. Excessive surface film, wetting changes, unbalanced alkali, drying or steaming can create diminishing returns or poorer print behavior.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-e9bebaf2\">5. How does pretreatment solids affect bleeding?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-374acd05\">Insufficient migration-control polymer can allow more lateral spreading. Increasing polymer add-on can improve edge definition until other surface or wash-off effects become limiting.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-2cbf24b7\">6. Does high pretreatment solids always make the fabric hard?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-1b970e21\">No. Reactive printing is followed by washing, so final hand depends on polymer washability, residual salts, unfixed dye and wash-off efficiency\u2014not solids alone.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-48a54adb\">7. Why should wet pick-up be measured?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-895a71aa\">Because the same pretreatment bath delivers different chemical add-on when the fabric retains different amounts of liquor.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-1c5b5514\">8. What is dry chemical add-on?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-0da40187\">It is a method-defined dry-mass increment or a retained-liquor estimate on a stated fabric basis. It is not automatically the amount of active polymer. Record the bath composition, pick-up basis, drying method and any assumptions or losses.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-370ce8f8\">9. Should I reduce urea to lower pretreatment solids?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-e7333020\">Only after validating moisture management, color yield and fixation under the actual steaming conditions. Urea serves a different function from thickener.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-45ebbe84\">10. Should I optimize solids before pick-up?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-c0492978\">For clean diagnosis, first build a controlled solids ladder at one pick-up, then optimize pick-up around the best chemical condition.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-81026c93\">11. Why can the same solids level behave differently on cotton and viscose?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-b05fe00e\">Fabric absorbency, swelling, pick-up and penetration differ, so the actual distribution of pretreatment and ink is not identical.<\/p>\n\n\n\n<h3 class=\"wp-block-wd-title title wd-4db99bf2\">12. What should I send FSX Chemical for pretreatment-solids matching?<\/h3>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-a653c717\">Send the fabric, ink, pretreatment formula or TDS, thickener, alkali, urea\/auxiliaries, concentration basis, wet pick-up, drying, steaming, washing and the specific color, bleeding or hand problem.<\/p>\n\n\n\n<h2 class=\"wp-block-wd-title title wd-9b654d9b\">Optimize Pretreatment Solids by Dry Add-On, Not Bath Concentration Alone<\/h2>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-9575e8be\">If your reactive digital prints show weak color, bleeding, excessive penetration, high drying demand or post-wash hand changes after a pretreatment adjustment, FSX Chemical can help structure a controlled solids \/ pick-up comparison.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d4d68620\">For a useful technical review, send:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Your reactive ink \/ dye system<\/li>\n\n\n\n<li>Fabric composition and construction<\/li>\n\n\n\n<li>\u10db\u10d8\u10db\u10d3\u10d8\u10dc\u10d0\u10e0\u10d4 \u10ec\u10d8\u10dc\u10d0\u10e1\u10ec\u10d0\u10e0\u10d8 \u10d3\u10d0\u10db\u10e3\u10e8\u10d0\u10d5\u10d4\u10d1\u10d8\u10e1 \u10de\u10e0\u10dd\u10d3\u10e3\u10e5\u10e2\u10d8 \/ TDS<\/li>\n\n\n\n<li>Thickener or migration-control dosage<\/li>\n\n\n\n<li>Alkali and moisture-management system<\/li>\n\n\n\n<li>Total pretreatment concentration basis<\/li>\n\n\n\n<li>\u10e1\u10d5\u10d4\u10da\u10d0\u10d3 \u10d0\u10e6\u10d4\u10d1\u10d0<\/li>\n\n\n\n<li>Drying \/ residual-moisture data<\/li>\n\n\n\n<li>\u10d2\u10d0\u10dd\u10e0\u10d7\u10e5\u10da\u10d4\u10d1\u10d8\u10e1 \u10de\u10d8\u10e0\u10dd\u10d1\u10d4\u10d1\u10d8<\/li>\n\n\n\n<li>\u10e1\u10d0\u10e0\u10d4\u10ea\u10ee\u10d8 \u10db\u10d0\u10e0\u10e8\u10e0\u10e3\u10e2\u10d8<\/li>\n\n\n\n<li>Current color, bleeding, penetration or hand target<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-54f2d1b8\">\u10d3\u10d0\u10d8\u10ec\u10e7\u10d4\u10d7 <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%9b%e1%83%9d%e1%83%9b%e1%83%a1%e1%83%90%e1%83%ae%e1%83%a3%e1%83%a0%e1%83%94%e1%83%91%e1%83%90\/%e1%83%a8%e1%83%94%e1%83%a1%e1%83%90%e1%83%91%e1%83%90%e1%83%9b%e1%83%98%e1%83%a1%e1%83%98-%e1%83%9c%e1%83%98%e1%83%9b%e1%83%a3%e1%83%a8%e1%83%94%e1%83%91%e1%83%98\/\">\u10dc\u10d8\u10db\u10e3\u10e8\u10d4\u10d1\u10d8 \u10d3\u10d0 \u10e8\u10d4\u10e1\u10d0\u10d1\u10d0\u10db\u10d8\u10e1\u10dd\u10d1\u10d0<\/a> for a controlled current-vs-candidate evaluation.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-183d10b1\">\u10db\u10d8\u10db\u10dd\u10ee\u10d8\u10da\u10d5\u10d0 <a href=\"https:\/\/fsxchemical.com\/ka\/product\/%e1%83%aa%e1%83%98%e1%83%a4%e1%83%a0%e1%83%a3%e1%83%9a%e1%83%98-%e1%83%91%e1%83%94%e1%83%ad%e1%83%93%e1%83%95%e1%83%98%e1%83%a1-%e1%83%9e%e1%83%90%e1%83%a1%e1%83%a2%e1%83%90\/\">\u10d3\u10d8\u10d2\u10d8\u10e2\u10d0\u10da\u10e3\u10e0\u10d8 \u10e2\u10d4\u10e5\u10e1\u10e2\u10d8\u10da\u10d8\u10e1 \u10d1\u10d4\u10ed\u10d3\u10d5\u10d8\u10e1 \u10ec\u10d8\u10dc\u10d0\u10e1\u10ec\u10d0\u10e0\u10d8 \u10d3\u10d0\u10db\u10e3\u10e8\u10d0\u10d5\u10d4\u10d1\u10d0<\/a> for the current FSX reactive inkjet pretreatment route.<\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-d2d2a1fe\">You can also <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%9b%e1%83%9d%e1%83%9b%e1%83%a1%e1%83%90%e1%83%ae%e1%83%a3%e1%83%a0%e1%83%94%e1%83%91%e1%83%90\/request-a-quote\/\">\u10db\u10dd\u10d8\u10d7\u10ee\u10dd\u10d5\u10d4\u10d7 \u10e4\u10d0\u10d1\u10e0\u10d8\u10d9\u10d8\u10e1 \u10de\u10d8\u10e0\u10d3\u10d0\u10de\u10d8\u10e0\u10d8 \u10e4\u10d0\u10e1\u10d8<\/a> after the suitable pretreatment grade and dry-add-on window are confirmed or <a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%93%e1%83%90%e1%83%92%e1%83%95%e1%83%98%e1%83%99%e1%83%90%e1%83%95%e1%83%a8%e1%83%98%e1%83%a0%e1%83%93%e1%83%98%e1%83%97\/\">\u10d3\u10d0\u10e3\u10d9\u10d0\u10d5\u10e8\u10d8\u10e0\u10d3\u10d8\u10d7 FSX \u10e5\u10d8\u10db\u10d8\u10d9\u10d0\u10da\u10e1<\/a> for technical discussion\ud83d\udce7\u00a0<strong>\u10d4\u10da\u10e4\u10dd\u10e1\u10e2\u10d0<a href=\"https:\/\/fsxchemical.com\/ka\/%e1%83%93%e1%83%90%e1%83%92%e1%83%95%e1%83%98%e1%83%99%e1%83%90%e1%83%95%e1%83%a8%e1%83%98%e1%83%a0%e1%83%93%e1%83%98%e1%83%97\/\">: Service@fsxchemical.com<\/a><\/strong><\/p>\n\n\n\n<p class=\"wp-block-wd-paragraph wd-274d49bf\"><strong>The most useful pretreatment-solids specification is not one bath concentration. It is a controlled dry chemical add-on window that combines solids concentration with fabric pick-up and is validated after drying, printing, steaming and washing for color yield, bleeding, fixation and post-wash fabric hand.<\/strong><\/p>","protected":false},"excerpt":{"rendered":"<p>Pretreatment solids affect ink localization, fixation chemistry, drying and wash-off, but bath concentration alone is not enough. The actual chemical load on fabric depends on both solids concentration and wet pick-up.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[1603,1154,1431,1602,1475,1451,1601,1383],"class_list":["post-11501","post","type-post","status-publish","format-standard","hentry","category-technical-guides","tag-bleeding","tag-color-yield","tag-digital-printing-thickener","tag-dry-add-on","tag-fabric-hand","tag-fabric-pick-up","tag-pretreatment-solids","tag-reactive-digital-printing"],"acf":[],"_links":{"self":[{"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/posts\/11501","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/comments?post=11501"}],"version-history":[{"count":3,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/posts\/11501\/revisions"}],"predecessor-version":[{"id":12018,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/posts\/11501\/revisions\/12018"}],"wp:attachment":[{"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/media?parent=11501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/categories?post=11501"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/fsxchemical.com\/ka\/wp-json\/wp\/v2\/tags?post=11501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}