{"id":10420,"date":"2026-08-12T08:21:54","date_gmt":"2026-08-12T08:21:54","guid":{"rendered":"https:\/\/fsxchemical.com\/?page_id=10420"},"modified":"2026-08-20T07:03:29","modified_gmt":"2026-08-20T07:03:29","slug":"cmc-acilis-sayfasi","status":"publish","type":"page","link":"https:\/\/fsxchemical.com\/tr\/cmc-landing-page\/","title":{"rendered":"CMC Landing Page"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\r\n\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n <\/picture>\r\n\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n
\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n\r\n \r\n\r\n

\r\n Direct CMC Manufacturer \u00b7 Formulated Textile Printing Thickeners\r\n <\/p>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n \r\n CMC Textile\r\n <\/span>\r\n\r\n \r\n Printing Thickener\r\n <\/span>\r\n\r\n <\/h1>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n FSX Chemical manufactures formulated CMC-based textile printing\r\n thickeners in HD, MD and LD routes. Selection starts with the\r\n printing process, DS direction and target paste viscosity, then\r\n compares the actual dosage, formulation compatibility and total\r\n thickener consumption under production conditions.\r\n <\/p>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n \r\n Reactive Printing\r\n <\/span>\r\n\r\n \r\n Cotton & Viscose\r\n <\/span>\r\n\r\n \r\n HD \u00b7 MD \u00b7 LD\r\n <\/span>\r\n\r\n \r\n Cost-in-Use Review\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n\r\n\r\n \r\n\r\n \r\n Request Matching Sample\r\n <\/a>\r\n\r\n\r\n\r\n \r\n\r\n \r\n Talk on WhatsApp\r\n <\/a>\r\n\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n Already using CMC, sodium alginate, PTA or another printing\r\n thickener? Share your current TDS, dosage, target viscosity\r\n or printing result for a starting-route comparison.\r\n <\/p>\r\n\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n

\r\n\r\n\r\n

\r\n HD \u00b7 MD \u00b7 LD Route Selection\r\n <\/p>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n \r\n Different DS Routes.\r\n <\/span>\r\n\r\n \r\n Compare by Dosage & Cost-in-Use.\r\n <\/span>\r\n\r\n <\/h2>\r\n\r\n\r\n\r\n

\r\n HD, MD and LD represent different formulated CMC routes.\r\n DS is an important selection parameter, but final fit should\r\n be confirmed by target paste viscosity, actual dosage,\r\n formulation compatibility and printing result.\r\n <\/p>\r\n\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n

\r\n\r\n \r\n HD\r\n <\/strong>\r\n\r\n \r\n Higher-DS reactive route\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n 1.9\u20132.0\r\n <\/strong>\r\n\r\n \r\n DS \u00b7 Higher\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n Starting application\r\n <\/span>\r\n\r\n \r\n Reactive Printing\r\n <\/strong>\r\n\r\n \r\n Cotton \/ viscose \u00b7 higher-DS route\r\n <\/small>\r\n\r\n <\/div>\r\n\r\n\r\n <\/a>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n MD\r\n <\/strong>\r\n\r\n \r\n Balanced formulation route\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n 1.5\u20131.6\r\n <\/strong>\r\n\r\n \r\n DS \u00b7 Medium\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n Starting application\r\n <\/span>\r\n\r\n \r\n General Reactive & Blending\r\n <\/strong>\r\n\r\n \r\n Balanced production route\r\n <\/small>\r\n\r\n <\/div>\r\n\r\n\r\n <\/a>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n LD\r\n <\/strong>\r\n\r\n \r\n Flexible blending route\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n 1.3\u20131.4\r\n <\/strong>\r\n\r\n \r\n DS \u00b7 Lower\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n Starting application\r\n <\/span>\r\n\r\n \r\n Reactive \/ Disperse Blending\r\n <\/strong>\r\n\r\n \r\n PTA \/ alginate compatibility evaluation\r\n <\/small>\r\n\r\n <\/div>\r\n\r\n\r\n <\/a>\r\n\r\n\r\n <\/nav>\r\n\r\n\r\n\r\n \r\n\r\n
\r\n\r\n \r\n Selection logic:\r\n <\/strong>\r\n\r\n \r\n Do not read HD \u2192 MD \u2192 LD as a simple quality ranking.\r\n Compare the required dosage and formulation performance\r\n under the same target paste viscosity and actual printing\r\n conditions.\r\n <\/span>\r\n\r\n <\/div>\r\n\r\n\r\n <\/aside>\r\n\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n
\r\n\r\n\r\n \r\n\r\n
\r\n\r\n
\r\n\r\n \r\n 01\r\n <\/span>\r\n\r\n \r\n Direct CMC Manufacturer\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n

\r\n Formulated CMC textile printing thickeners manufactured and\r\n supplied directly by FSX Chemical.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n\r\n
\r\n\r\n \r\n 02\r\n <\/span>\r\n\r\n \r\n HD \/ MD \/ LD Matching\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n

\r\n Select the starting route according to process, DS direction,\r\n target paste viscosity and formulation conditions.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n\r\n
\r\n\r\n \r\n 03\r\n <\/span>\r\n\r\n \r\n Dosage & Cost-in-Use\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n

\r\n Compare actual addition level and total thickener consumption\r\n rather than evaluating price per kilogram alone.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n

\r\n\r\n
\r\n\r\n \r\n 04\r\n <\/span>\r\n\r\n \r\n Batch QC & Documents\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n

\r\n Viscosity, pH and batch consistency review with TDS, SDS\r\n and batch COA support for export orders.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n<\/section>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\r\n\r\n\r\n
\r\n\r\n \r\n\r\n
\r\n\r\n
\r\n\r\n \r\n\r\n \r\n 02\r\n <\/span>\r\n\r\n
\r\n The right CMC route is selected by printing performance and\r\n cost-in-use \u2014 not by powder appearance or one viscosity number alone.\r\n <\/figcaption>\r\n\r\n <\/figure>\r\n\r\n\r\n
\r\n\r\n

\r\n CMC Selection Logic \u00b7 Process \u2192 Viscosity \u2192 Dosage \u2192 Cost\r\n <\/p>\r\n\r\n

\r\n Start With the Process.
\r\n Define the Target Before the Grade.\r\n <\/h2>\r\n\r\n

\r\n A reference viscosity value is only one part of CMC selection.\r\n The practical question is how much formulated CMC is required to\r\n reach the target printing-paste viscosity while maintaining suitable\r\n rheology, printability and formulation compatibility.\r\n <\/p>\r\n\r\n

\r\n\r\n \r\n Cost-in-Use Logic\r\n <\/span>\r\n\r\n \r\n Thickening Efficiency \u2192 Required Dosage \u2192 Thickener Consumption\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n \r\n\r\n \r\n\r\n
\r\n\r\n \r\n 01\r\n <\/span>\r\n\r\n
\r\n\r\n

\r\n Start With\r\n <\/p>\r\n\r\n

\r\n Printing Process\r\n <\/h3>\r\n\r\n

\r\n Fabric type, printing route, dye system and the required print\r\n definition establish the application conditions.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n <\/article>\r\n\r\n\r\n \r\n\r\n

\r\n\r\n \r\n 02\r\n <\/span>\r\n\r\n
\r\n\r\n

\r\n Define\r\n <\/p>\r\n\r\n

\r\n Target Viscosity & Dosage\r\n <\/h3>\r\n\r\n

\r\n Compare the target paste viscosity with the amount of thickener\r\n required to reach it under the actual formulation conditions.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n <\/article>\r\n\r\n\r\n \r\n\r\n

\r\n\r\n \r\n 03\r\n <\/span>\r\n\r\n
\r\n\r\n

\r\n Then Compare\r\n <\/p>\r\n\r\n

\r\n Performance & Cost-in-Use\r\n <\/h3>\r\n\r\n

\r\n Evaluate DS direction, thickening efficiency, formulation\r\n compatibility and total thickener consumption \u2014 not only price\/kg.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n <\/article>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n

\r\n\r\n \r\n Why dosage matters\r\n <\/strong>\r\n\r\n

\r\n Higher thickening efficiency can reduce the addition level required\r\n to reach the same target paste viscosity, helping lower thickener\r\n consumption and improve formulation economics. Final dosage should\r\n always be confirmed under the customer's actual printing conditions.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n<\/section>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\n\n\n
\n\n\n \n\n
\n\n
\n\n

\n CMC PRINTING THICKENER \u00b7 MACHINE \u00b7 FORMULA \u00b7 COST-IN-USE\n <\/p>\n\n\n \n Match CMC to Your Printing Process\n & Current Thickener Formula<\/span>\n <\/h2>\n\n\n

\n Start with the printing machine, current thickener formula and target\n paste viscosity. Flat screen, rotary screen and blended systems can\n require different rheology, screen passage and dosage. Identify the\n closest production route first, then compare HD, MD and LD under the\n same viscosity target and printing conditions.\n <\/p>\n\n <\/div>\n\n\n\n \n\n \n\n \n START HERE\n <\/span>\n\n \n Tell us your machine, current formula, target paste viscosity and\n dosage. Then compare HD \/ MD \/ LD under the same production target.\n <\/strong>\n\n <\/aside>\n\n <\/header>\n\n\n\n \n\n \n\n\n \n\n \n\n\n \n\n

\n\n \n\n\n \n FLAT\n <\/span>\n\n\n \n Flat Screen \u00b7 Textile Printing\n <\/span>\n\n <\/div>\n\n\n\n \n\n
\n\n\n
\n\n \n FLAT SCREEN PRINTING\n <\/span>\n\n \n BATCH ROUTE\n <\/strong>\n\n <\/div>\n\n\n\n

\n\n \n CMC for Flat Screen Printing\n <\/span>\n\n \n Flat Screen\n <\/span>\n\n <\/h3>\n\n\n\n

\n Evaluate paste body, working viscosity, screen passage and\n squeegee transfer under the actual formulation. The practical\n route is the one that reaches the required print result without\n unnecessary thickener consumption.\n <\/p>\n\n\n

\n Focus on paste body, screen passage and actual dosage.\n <\/p>\n\n\n\n \n\n

\n\n \n Process Focus\n <\/span>\n\n
    \n
  • Paste Body<\/li>\n
  • Screen Passage<\/li>\n
  • Squeegee Transfer<\/li>\n <\/ul>\n\n <\/div>\n\n\n\n \n\n
    \n\n \n Selection\n <\/span>\n\n \n Compare HD \/ MD \/ LD by required dosage and print result\n at the same target paste viscosity.\n <\/strong>\n\n <\/div>\n\n\n <\/div>\n\n <\/article>\n\n\n\n \n\n \n\n\n \n\n
    \n\n \n\n\n \n ROTARY\n <\/span>\n\n\n \n Rotary Screen \u00b7 Continuous Printing\n <\/span>\n\n <\/div>\n\n\n\n \n\n
    \n\n\n
    \n\n \n ROTARY SCREEN PRINTING\n <\/span>\n\n \n CONTINUOUS\n <\/strong>\n\n <\/div>\n\n\n\n

    \n\n \n CMC for Rotary Screen Printing\n <\/span>\n\n \n Rotary Screen\n <\/span>\n\n <\/h3>\n\n\n\n

    \n Rotary production places more emphasis on paste rheology,\n screen mesh and continuous running stability. Compare the CMC\n dosage required to maintain target viscosity and consistent\n print definition during production.\n <\/p>\n\n\n

    \n Focus on rheology, running stability and required dosage.\n <\/p>\n\n\n\n \n\n

    \n\n \n Process Focus\n <\/span>\n\n
      \n
    • Paste Rheology<\/li>\n
    • Screen Mesh<\/li>\n
    • Run Stability<\/li>\n <\/ul>\n\n <\/div>\n\n\n\n \n\n
      \n\n \n Selection\n <\/span>\n\n \n Compare HD \/ MD \/ LD under the same target viscosity\n and continuous running conditions.\n <\/strong>\n\n <\/div>\n\n\n <\/div>\n\n <\/article>\n\n\n\n \n\n \n\n\n \n\n
      \n\n \n\n\n \n BLEND\n <\/span>\n\n\n \n Existing Printing Line \u00b7 Blended Formula\n <\/span>\n\n <\/div>\n\n\n\n \n\n
      \n\n\n
      \n\n \n BLENDED THICKENER FORMULA\n <\/span>\n\n \n BLEND\n <\/strong>\n\n <\/div>\n\n\n\n

      \n\n \n CMC in Blended Thickener Systems\n <\/span>\n\n \n Blended Formula\n <\/span>\n\n <\/h3>\n\n\n\n

      \n When CMC is blended with sodium alginate, PTA or another\n thickener, evaluate its viscosity contribution inside the\n complete formula. Compare compatibility, CMC ratio and total\n thickener dosage required for the same production result.\n <\/p>\n\n\n

      \n Compare CMC ratio, compatibility, dosage and cost-in-use.\n <\/p>\n\n\n\n \n\n

      \n\n \n Formula Focus\n <\/span>\n\n
        \n
      • CMC Ratio<\/li>\n
      • Compatibility<\/li>\n
      • Total Dosage<\/li>\n <\/ul>\n\n <\/div>\n\n\n\n \n\n
        \n\n \n Selection\n <\/span>\n\n \n Match HD \/ MD \/ LD inside the actual blended formula,\n not only in a separate water solution.\n <\/strong>\n\n <\/div>\n\n\n <\/div>\n\n <\/article>\n\n\n\n \n\n \n\n\n \n\n
        \n\n \n\n\n \n MATCH\n <\/span>\n\n\n \n Current CMC \u00b7 Replacement Matching\n <\/span>\n\n <\/div>\n\n\n\n \n\n
        \n\n\n
        \n\n \n CURRENT PRODUCT MATCH\n <\/span>\n\n \n CUSTOM\n <\/strong>\n\n <\/div>\n\n\n\n

        \n\n \n Match Your Current CMC or Thickener\n <\/span>\n\n \n Current CMC Match\n <\/span>\n\n <\/h3>\n\n\n\n

        \n For replacement or second-source evaluation, share the current\n TDS \/ COA, viscosity test condition, DS, dosage and target paste\n viscosity. FSX can narrow an HD, MD or LD starting route for\n side-by-side production testing.\n <\/p>\n\n\n

        \n Share TDS, test condition, dosage and target viscosity.\n <\/p>\n\n\n\n \n\n

        \n\n \n Matching Input\n <\/span>\n\n
          \n
        • TDS \/ COA<\/li>\n
        • Test Method<\/li>\n
        • Current Dosage<\/li>\n <\/ul>\n\n <\/div>\n\n\n\n \n\n
          \n\n \n Matching\n <\/span>\n\n \n Keep viscosity test conditions and production targets\n consistent when comparing suppliers.\n <\/strong>\n\n <\/div>\n\n\n\n \n\n \n Match My Current CMC\n \u2192<\/span>\n <\/a>\n\n\n <\/div>\n\n <\/article>\n\n\n <\/div>\n\n\n\n \n\n
          \n\n\n \n\n
          \n\n \n CMC Matching Inputs\n <\/span>\n\n\n
          \n\n \n Printing Machine\n <\/span>\n\n \n Current Formula\n <\/span>\n\n \n Target Paste Viscosity\n <\/span>\n\n \n Current Dosage\n <\/span>\n\n \n DS \/ Test Method\n <\/span>\n\n \n Cost-in-Use\n <\/span>\n\n <\/div>\n\n <\/div>\n\n\n\n \n\n
          \n\n \n CMC Selection Logic\n <\/span>\n\n\n
          \n\n \n Machine \/ Process\n <\/span>\n\n \n \u2192\n <\/i>\n\n \n Current Formula\n <\/span>\n\n \n \u2192\n <\/i>\n\n \n Target Viscosity\n <\/span>\n\n \n \u2192\n <\/i>\n\n \n Required Dosage\n <\/span>\n\n \n \u2192\n <\/i>\n\n \n HD \/ MD \/ LD\n <\/span>\n\n \n \u2192\n <\/i>\n\n \n Production Trial\n <\/span>\n\n <\/div>\n\n\n

          \n Compare grades under the same target paste viscosity,\n test method and actual production conditions.\n <\/p>\n\n <\/div>\n\n\n <\/div>\n\n\n\n \n\n

          \n\n\n \n \u2192\n <\/div>\n\n\n
          \n\n \n NEXT: HD \/ MD \/ LD TECHNICAL COMPARISON\n <\/span>\n\n \n Compare DS, reference viscosity, required dosage,\n formulation fit and cost-in-use.\n <\/strong>\n\n <\/div>\n\n\n <\/div>\n\n\n <\/div>\n\n<\/section>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
          \n\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\r\n\r\n\r\n\r\n
          \r\n\r\n\r\n \r\n\r\n
          \r\n\r\n
          \r\n\r\n

          \r\n CMC TECHNICAL COMPARISON\r\n <\/p>\r\n\r\n \r\n Compare LD, MD and HD\r\n by the Parameters That Matter<\/span>\r\n <\/h2>\r\n\r\n

          \r\n Compare degree of substitution, reference viscosity, test basis\r\n and formulation fit before selecting a starting trial route.\r\n For production economics, also compare the dosage required to\r\n reach the same target printing-paste viscosity.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n \r\n COST-IN-USE\r\n <\/span>\r\n\r\n \r\n Do not compare price\/kg alone.\r\n <\/strong>\r\n\r\n

          \r\n Compare the dosage required to reach your target paste viscosity.\r\n <\/p>\r\n\r\n <\/aside>\r\n\r\n <\/header>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n\r\n \r\n\r\n \r\n\r\n

          <\/div>\r\n\r\n\r\n
          \r\n\r\n\r\n
          \r\n\r\n
          \r\n 01<\/b>\r\n FLEXIBLE ROUTE<\/span>\r\n <\/div>\r\n\r\n

          LD<\/h3>\r\n\r\n

          \r\n Reactive \/ Disperse Blending\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n

          \r\n\r\n
          \r\n\r\n \r\n SUBSTITUTION LEVEL\r\n <\/span>\r\n\r\n \r\n DS 1.3\u20131.4 \u00b7 Lower\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/i>\r\n\r\n <\/div>\r\n\r\n\r\n
          \r\n LOWER DS<\/span>\r\n MID DS<\/span>\r\n HIGHER DS<\/span>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n
          \r\n REFERENCE VISCOSITY<\/span>\r\n 1,500\u20133,000<\/strong>\r\n mPa\u00b7s<\/small>\r\n <\/div>\r\n\r\n
          \r\n TEST BASIS<\/span>\r\n 1% Solution<\/strong>\r\n at 20\u00b0C<\/small>\r\n <\/div>\r\n\r\n
          \r\n pH<\/span>\r\n 7\u20139<\/strong>\r\n 1% solution<\/small>\r\n <\/div>\r\n\r\n
          \r\n STARTING DOSAGE<\/span>\r\n Target-Based<\/strong>\r\n Confirm by paste viscosity<\/small>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n \r\n STARTING APPLICATION FIT\r\n <\/span>\r\n\r\n \r\n Reactive \/ disperse \u00b7 PTA \/ alginate systems\r\n <\/strong>\r\n\r\n

          \r\n Flexible formulated CMC route where compatibility with PTA,\r\n alginate or other blended thickener systems is evaluated.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n

          \r\n\r\n \r\n ECONOMY CHECK\r\n <\/span>\r\n\r\n \r\n Compare dosage required to reach your target viscosity.\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n \r\n Request LD Trial<\/span>\r\n \u2192<\/b>\r\n <\/a>\r\n\r\n <\/article>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n
          <\/div>\r\n\r\n\r\n
          \r\n\r\n\r\n
          \r\n\r\n
          \r\n 02<\/b>\r\n BALANCED ROUTE<\/span>\r\n <\/div>\r\n\r\n

          MD<\/h3>\r\n\r\n

          \r\n General Reactive & Blending\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n

          \r\n\r\n
          \r\n\r\n \r\n SUBSTITUTION LEVEL\r\n <\/span>\r\n\r\n \r\n DS 1.5\u20131.6 \u00b7 Medium\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/i>\r\n\r\n <\/div>\r\n\r\n\r\n
          \r\n LOWER DS<\/span>\r\n MID DS<\/span>\r\n HIGHER DS<\/span>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n
          \r\n REFERENCE VISCOSITY<\/span>\r\n 800\u20131,800<\/strong>\r\n mPa\u00b7s<\/small>\r\n <\/div>\r\n\r\n
          \r\n TEST BASIS<\/span>\r\n 1% Solution<\/strong>\r\n at 20\u00b0C<\/small>\r\n <\/div>\r\n\r\n
          \r\n pH<\/span>\r\n 7\u20139<\/strong>\r\n 1% solution<\/small>\r\n <\/div>\r\n\r\n
          \r\n STARTING DOSAGE<\/span>\r\n Target-Based<\/strong>\r\n Confirm by paste viscosity<\/small>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n \r\n STARTING APPLICATION FIT\r\n <\/span>\r\n\r\n \r\n General reactive \u00b7 Blended systems\r\n <\/strong>\r\n\r\n

          \r\n Balanced formulated CMC route for general reactive printing\r\n and formulation adjustment.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n

          \r\n\r\n \r\n ECONOMY CHECK\r\n <\/span>\r\n\r\n \r\n Compare dosage required to reach your target viscosity.\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n \r\n Request MD Trial<\/span>\r\n \u2192<\/b>\r\n <\/a>\r\n\r\n <\/article>\r\n\r\n\r\n\r\n \r\n\r\n \r\n\r\n
          <\/div>\r\n\r\n\r\n
          \r\n\r\n\r\n
          \r\n\r\n
          \r\n 03<\/b>\r\n HIGH DS ROUTE<\/span>\r\n <\/div>\r\n\r\n

          HD<\/h3>\r\n\r\n

          \r\n Higher-Performance Reactive\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n

          \r\n\r\n
          \r\n\r\n \r\n SUBSTITUTION LEVEL\r\n <\/span>\r\n\r\n \r\n DS 1.9\u20132.0 \u00b7 Higher\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/span>\r\n\r\n <\/i>\r\n\r\n <\/div>\r\n\r\n\r\n
          \r\n LOWER DS<\/span>\r\n MID DS<\/span>\r\n HIGHER DS<\/span>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n
          \r\n REFERENCE VISCOSITY<\/span>\r\n 800\u20131,800<\/strong>\r\n mPa\u00b7s<\/small>\r\n <\/div>\r\n\r\n
          \r\n TEST BASIS<\/span>\r\n 1% Solution<\/strong>\r\n at 20\u00b0C<\/small>\r\n <\/div>\r\n\r\n
          \r\n pH<\/span>\r\n 7\u20139<\/strong>\r\n 1% solution<\/small>\r\n <\/div>\r\n\r\n
          \r\n STARTING DOSAGE<\/span>\r\n Target-Based<\/strong>\r\n Confirm by paste viscosity<\/small>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n \r\n STARTING APPLICATION FIT\r\n <\/span>\r\n\r\n \r\n Reactive printing \u00b7 Cotton & viscose\r\n <\/strong>\r\n\r\n

          \r\n Higher-DS formulated CMC route for reactive textile\r\n printing evaluation.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n

          \r\n\r\n \r\n ECONOMY CHECK\r\n <\/span>\r\n\r\n \r\n Compare dosage required to reach your target viscosity.\r\n <\/strong>\r\n\r\n <\/div>\r\n\r\n\r\n \r\n\r\n \r\n Request HD Trial<\/span>\r\n \u2192<\/b>\r\n <\/a>\r\n\r\n <\/article>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n
          \r\n COST-IN-USE LOGIC\r\n <\/div>\r\n\r\n\r\n
          \r\n\r\n
          \r\n 01<\/span>\r\n Target Viscosity<\/strong>\r\n <\/div>\r\n\r\n \u2192<\/b>\r\n\r\n
          \r\n 02<\/span>\r\n Required Dosage<\/strong>\r\n <\/div>\r\n\r\n \u2192<\/b>\r\n\r\n
          \r\n 03<\/span>\r\n Consumption<\/strong>\r\n <\/div>\r\n\r\n \u2192<\/b>\r\n\r\n
          \r\n 04<\/span>\r\n Cost-in-Use<\/strong>\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n
          \r\n\r\n\r\n
          \r\n\r\n \r\n \u2713\r\n <\/div>\r\n\r\n\r\n
          \r\n\r\n \r\n FINAL TRIAL CHECK\r\n <\/span>\r\n\r\n \r\n Confirm grade and dosage under your actual printing conditions.\r\n <\/strong>\r\n\r\n

          \r\n Typical specifications are shown above; batch values are\r\n confirmed by COA.\r\n <\/p>\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n

          \r\n\r\n\r\n \r\n \r\n Get CMC Recommendation\r\n <\/strong>\r\n\r\n \r\n \u2192\r\n <\/b>\r\n <\/a>\r\n\r\n\r\n \r\n \r\n Match My Current CMC\r\n <\/strong>\r\n\r\n \r\n \u2192\r\n <\/b>\r\n <\/a>\r\n\r\n\r\n <\/div>\r\n\r\n <\/div>\r\n\r\n\r\n <\/div>\r\n\r\n\r\n\r\n \r\n\r\n