BN 
EN 
UR 
TR 
ID 
RU 
AR সোডিয়াম অ্যালজিনেট
ডিজিটাল প্রিন্টিং পেস্ট ও ঘনকারী
প্রতিক্রিয়াশীল, ডিসপার্স এবং পিগমেন্ট টেক্সটাইল প্রিন্টিংয়ের জন্য ডিজিটাল প্রিন্টিং পেষ্ট ও ঘনকারী
FSX কেমিক্যাল টেক্সটাইল প্রিন্টিং মিল এবং রাসায়নিক বিতরণকারীদের DP-R, DP-D এবং DP-P পণ্য রুট, নমুনা মিলানো, প্রযুক্তিগত নথি এবং রপ্তানি সরবরাহ সহায়তার মাধ্যমে সমর্থন করে।.
পণ্যের সংজ্ঞা
What is Sodium Alginate?
What is sodium alginate?
Sodium alginate is a seaweed-derived, water-soluble polysaccharide widely used as a textile printing thickener. In reactive dye printing, it helps build smooth paste body, stable viscosity, clean print outlines and reliable wash-off after steaming.
What does sodium alginate do in textile printing?
Sodium alginate is mainly used for reactive printing on cotton, viscose, silk and other cellulosic fabrics. It supports paste preparation, screen penetration, color yield, print definition and wash-off performance under proper process conditions.
How should sodium alginate grades be compared?
Sodium alginate grades should be compared by reference viscosity, test concentration, test temperature, hydration conditions, printing process and final paste performance. The same viscosity range may represent different use directions when the test concentration is different.
Sodium alginate should not be selected only by viscosity number. Start from fabric, reactive dye system, paste concentration, printing process and sample performance under actual production conditions.
আবেদন নির্বাচনকারী
Explore the reactive printing routes connected to this sodium alginate family
Product pages explain what FSX Chemical supplies. Application pages explain how sodium alginate is evaluated within reactive printing processes, fabric routes and paste performance requirements.
Sodium Alginate for Reactive Cotton Printing
Used for reactive dye printing on cotton where smooth paste body, color yield, print definition and clean wash-off are important.
Sodium Alginate for Viscose and Cellulosic Fabrics
Evaluated for viscose, silk and cellulosic blends where stable viscosity and practical wash-off performance are required.
Sodium Alginate for High-Body Paste
HV route may be evaluated when lower dosage, higher paste body and stable viscosity are required under proper process conditions.
Sodium Alginate for High-Speed Rotary Printing
LV route may be evaluated for high-speed rotary systems where flow behavior, screen passage and process stability are key concerns.
গ্রেড তুলনা
Compare sodium alginate grades by viscosity method and application route
Use this table as a starting point for sodium alginate grade comparison. The same reference viscosity range may use different test concentrations, so viscosity should only be compared under the same test method.
Fushixin Print HV data is based on the current HV TDS. Fushixin Print MV and LV data is based on the 2026 product catalogue until grade-specific TDS files are added. Final selection should be confirmed by laboratory or production-side testing.
| গ্রেড | সান্দ্রতা / পদ্ধতি | মূল পরামিতি | পিএইচ / আর্দ্রতা | প্রয়োগ | সুপারিশকৃত প্রক্রিয়া | ক্রিয়া |
|---|---|---|---|---|---|---|
| Fushixin Print HVHigh Viscosity Sodium Alginate | 20,000–30,000 mPa·s3% · 20°C | ডি.এস. প্রযোজ্য নয় | 7.0–8.0 / Max. 12.0% | High-body paste and lower-dosage reactive printing | High-viscosity sodium alginate route for reactive printing, high-body paste and lower-dosage applications. Recommended for buyers requiring smooth paste body, stable viscosity, clean print definition and good wash-off performance. | টিডিএস অনুরোধ করুন |
| Fushixin Print MVMedium Viscosity Sodium Alginate | 20,000–30,000 mPa·s5% · 20°C | ডি.এস. প্রযোজ্য নয় | ৭–৮ / নির্বাচিত TDS/ব্যাচ COA দ্বারা নিশ্চিতকরণ | General-purpose reactive printing | General-purpose sodium alginate route for reactive textile printing. Recommended for buyers evaluating balanced paste body, stable viscosity, print definition and practical reactive printing performance. | টিডিএস অনুরোধ করুন |
| Fushixin Print LVLow Viscosity Sodium Alginate | 20,000–30,000 mPa·s8% · 20°C | ডি.এস. প্রযোজ্য নয় | ৭–৮ / নির্বাচিত TDS/ব্যাচ COA দ্বারা নিশ্চিতকরণ | High-speed rotary reactive printing | Low-viscosity sodium alginate route for high-speed rotary printing and systems requiring lower paste body under proper process conditions. Recommended for buyers comparing flow behavior and screen passage. | টিডিএস অনুরোধ করুন |
High-viscosity sodium alginate route for reactive printing, high-body paste and lower-dosage applications. Recommended for buyers requiring smooth paste body, stable viscosity, clean print definition and good wash-off performance.
General-purpose sodium alginate route for reactive textile printing. Recommended for buyers evaluating balanced paste body, stable viscosity, print definition and practical reactive printing performance.
Low-viscosity sodium alginate route for high-speed rotary printing and systems requiring lower paste body under proper process conditions. Recommended for buyers comparing flow behavior and screen passage.
Not sure which sodium alginate grade matches your process?
Send your current TDS, COA, viscosity method, fabric type, reactive dye system or sample requirement. FSX Chemical can compare sodium alginate grade direction before recommending a validation route.
গ্রেড নির্বাচন পদ্ধতি
How to choose the right sodium alginate grade
Select sodium alginate by fabric, reactive dye process, paste concentration, viscosity method and sample performance under actual production conditions.
Step 1: Confirm fabric and dye process
Start from reactive printing on cotton, viscose, silk or other cellulosic fabrics. Different printing processes may require different paste body and screen behavior.
Step 2: Compare concentration and viscosity method
HV, MV and LV may share a similar reference viscosity range but use different test concentrations. Compare concentration, temperature, hydration and testing method before selection.
ধাপ ৩: বৃহৎ পরিমাণে অর্ডার করার আগে পরীক্ষা করুন
Run laboratory or production-side testing to confirm paste body, color yield, print definition, screen penetration and wash-off before commercial use.
নমুনা মিলানো ও দলিলপত্র
Match your current sodium alginate before bulk purchasing
Send your current sample, TDS or COA so our technical team can compare sodium alginate grade direction and document support before order confirmation.
মিলিত কর্মপ্রবাহ
আপনার বর্তমান TDS, COA, সান্দ্রতা পদ্ধতি বা শারীরিক নমুনা পাঠান।
We compare your current specification with FSX Chemical product data and recommend a matched sodium alginate route for validation.
Send TDS, COA or a current sodium alginate sample for comparison.
Confirm concentration, temperature, hydration time, instrument and test method before judging viscosity equivalence.
Compare whether the product is used for high-body paste, general reactive printing or high-speed rotary printing.
বাণিজ্যিক ব্যবহারের আগে অভ্যন্তরীণ বা উৎপাদন-পার্শ্বের পরীক্ষা চালান।.
কারখানা / ল্যাব / মান নিয়ন্ত্রণ প্রুফ
কারখানা, ল্যাব এবং QC-প্রমাণিত
নমুনা মূল্যায়নের আগে সরবরাহ সক্ষমতা যাচাই করতে প্রকৃত উৎপাদন, পরীক্ষা এবং প্যাকিংয়ের ছবি ব্যবহার করুন।.
Use real workshop, product sample, viscosity testing or export packing image here only after you insert the image.
Review formal manufacturing and production support for sodium alginate orders.
সান্দ্রতা পরীক্ষা, নমুনা তুলনা এবং পদ্ধতি পর্যালোচনা চিত্র ব্যবহার করুন।.
ব্যাচ ডকুমেন্ট এবং নিশ্চিত অর্ডারের জন্য COA সমর্থন।.
Standard 25 kg bags, customized labels and export document support for international shipment.
পণ্যের প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী
Resolve sodium alginate grade risk before sample testing
বাস্তব ল্যাবরেটরি, পণ্যের নমুনা বা প্রকৌশলীর যোগাযোগ চিত্র ব্যবহার করুন।.
পণ্যের প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী
Questions buyers ask before selecting a sodium alginate grade
These answers help buyers compare viscosity method, grade direction, samples and documents before sending an inquiry.
01What is sodium alginate used for in textile printing?
Sodium alginate is widely used as a reactive textile printing thickener for cotton, viscose, silk and other cellulosic fabrics. It helps build smooth paste body, stable viscosity, clean print definition, color yield and easy wash-off after steaming.
02How do I choose between HV, MV and LV?
Start from the printing process and paste requirement. HV is positioned for high-body paste and lower dosage, MV for general-purpose reactive printing, and LV for high-speed rotary printing. Final selection should be confirmed by sample testing.
03Why do HV, MV and LV show the same viscosity range?
The reference viscosity range may look similar, but the test concentration is different: HV is tested at 3%, MV at 5%, and LV at 8%. The concentration difference reflects different paste body and application directions.
04Can sodium alginate be replaced by CMC or CMS?
CMC or CMS may be evaluated in selected systems for cost or formulation adjustment, but they are not universal one-to-one replacements for sodium alginate. Suitability depends on dye system, fabric, paste recipe, color yield, wash-off and final print performance.
05অর্ডার নিশ্চিতকরণের আগে FSX Chemical কী কী নথি সরবরাহ করতে পারে?
TDS and SDS can be provided for the selected sodium alginate product route. A batch-specific COA is normally prepared according to confirmed production batch and order requirements.
06How should sodium alginate be stored?
Store sodium alginate sealed in a cool, dry and ventilated place. Avoid moisture exposure after opening. Standard packing is normally 25 kg bag, with customized labels available upon request.
