ტექნიკური სახელმძღვანელოები ტექსტილის ბეჭდვის ქიმიკატებისთვის
გაეცანით პრაქტიკულ სახელმძღვანელოს CMC-ის, CMS-ის, ნატრიუმის ალგინატის, ციფრული ბეჭდვის პასტის და ტექსტილის ბეჭდვის შესქელებლების შერჩევის, გამოყენების, ტესტირებისა და მომწოდებლის შეფასების შესახებ.
Digital Textile Pretreatment Filtration: How to Control Residue Before Fabric Application
Digital textile pretreatment residue can come from incomplete polymer hydration, formula incompatibility, water hardness, foreign contamination or storage instability. Filtration should remove process-relevant particles without creating excessive pressure drop or impractical production throughput.
How to Store Pretreated Fabric Before Reactive Digital Printing
Pretreated fabric should be managed as a controlled intermediate product. Humidity, temperature, holding time, roll pressure, alkali, urea and moisture regain can change the fabric state before reactive inkjet printing and affect final color, bleeding and process repeatability.
Disperse Direct Printing vs. Sublimation Transfer: What Changes in Textile Pretreatment?
Direct disperse printing and sublimation transfer use related dye chemistry but control the image on different surfaces. Direct printing may require fabric pretreatment to control aqueous ink on polyester, while transfer printing relies heavily on coated transfer paper and heat-transfer conditions.
Pigment Digital Printing Pretreatment vs. Binder: What Does Each One Actually Do?
Pigment pretreatment and binder perform different functions. Pretreatment controls how pigment ink interacts with the fabric before curing, while binder forms the polymer film responsible for durable pigment fixation. The correct system must balance color strength, sharpness, rubbing fastness and fabric hand.
CMC Degree of Substitution (DS): How It Affects Salt Tolerance, Solubility and Textile Printing Performance
Degree of substitution is one of the most important structural specifications of CMC. Higher DS can improve water compatibility and electrolyte tolerance in suitable grades, but viscosity and textile printing performance also depend on molecular weight, substitution uniformity, purity, formulation and test conditions.
CMC Purity, Sodium Chloride and Active Content: What Textile Buyers Should Compare
CMC purity should not be evaluated from one percentage alone. Textile buyers should separately compare active CMC, sodium chloride, moisture, sodium glycolate where relevant, DS, viscosity method and actual printing performance.
How Water Hardness Affects CMC Hydration and Viscosity in Textile Printing
Water hardness can change how CMC hydrates, expands and builds viscosity. Calcium and magnesium can behave differently from sodium salts, and hard water does not always cause the same viscosity response. Plant water should therefore be tested as part of the actual textile printing formulation.
CMC for Pigment Printing: How to Evaluate Binder Compatibility, Rheology and Fabric Hand Feel
CMC can be evaluated as a rheology modifier or thickener in selected pigment printing formulations, but pure-water viscosity is not enough. Binder compatibility, complete-paste rheology, curing, rubbing fastness and finished fabric hand must be evaluated together.
CMS for Disperse Printing on Polyester: Paste Stability, Screen Running and Thermal Fixation
CMS can be evaluated as a thickener or compound-thickener component in selected polyester disperse printing systems, but performance depends on complete-paste stability, screen rheology, dye release during thermal fixation and finished print quality—not stock-paste viscosity alone.
How Salt, Alkali and Temperature Affect CMS Printing Paste Viscosity
Salt, alkali and temperature can all change CMS printing-paste viscosity, but through different mechanisms. Salt changes ionic strength, alkali changes both pH and ionic environment, and temperature changes molecular mobility and measured viscosity. The actual response depends on CMS grade, DS, concentration, water quality and holding time.
CMS for Vat and Discharge Printing: What Should You Test Before Production Approval?
CMS for vat and discharge printing should be approved through the complete chemical process—not from stock viscosity alone. Alkali, reducing agents, electrolytes, holding time, screen running, development and washing must all be validated.
CMS vs. Tamarind Gum for Polyester Disperse Printing: A Practical Comparison
CMS and tamarind-derived thickeners can both work in polyester disperse printing, but they differ in hydration, rheology, screen running, dye release, wash-off and batch behavior. The correct choice should be made from controlled printing trials rather than viscosity or price alone.
გაგზავნეთ თქვენი პროდუქტის მოთხოვნა
გაგვიზიარეთ პროდუქტის დასახელება, გამოყენების სფერო, რაოდენობა, დანიშნულების ადგილი და ნებისმიერი TDS, ნიმუშის ფოტო ან დოკუმენტი, რომელიც უკვე გაქვთ. FSX Chemical შეისწავლის ინფორმაციას და გირჩევთ შემდეგ ნაბიჯს ფასის შეთავაზების, ნიმუშთან შესაბამისობის ან პროდუქტის შერჩევისთვის.
