Lọc trong quá trình tiền xử lý dệt may kỹ thuật số: Cách kiểm soát cặn bã trước khi xử lý vải

Digital textile pretreatment filtration is not simply a housekeeping step. Residue can come from incompletely hydrated polymer, agglomeration after salts or alkali are added, insoluble contamination, hard-water deposits or material introduced during mixing and storage. If these particles reach the fabric, they can create streaks, specks, uneven chemical add-on and inconsistent print definition. This guide explains how to control residue before padding, coating or other fabric application without relying on one universal filter mesh or micron rating.

What Does Pretreatment Filtration Mean in Digital Textile Printing?

In many digital textile printing systems, the thickener and functional auxiliaries are applied to the fabric before inkjet printing rather than being placed inside the ink itself.

A typical route may be:

Pretreatment Preparation → Hydration / Dispersion → Formula Completion → Filtration → Fabric Application → Drying or Controlled Wet State → Digital Printing → Fixation → Washing or Curing

Filtration is the point where the mill removes unwanted particles or agglomerates before they reach the application equipment and fabric.

The goal is not to make the solution visually “perfect.”

The goal is to remove material that can create:

• Uneven pretreatment application
• Surface specks
• Streaks
• Roller contamination
• Nozzle or spray blockage in applicable pretreatment equipment
• Local changes in ink spreading
• Production instability

The correct filtration procedure depends on the pretreatment chemistry, viscosity, product form and application equipment.

Pretreatment Filtration Is Not the Same as Ink Filtration

This distinction is important.

Inkjet ink must pass through very small fluid channels and printhead nozzles, so ink manufacturing requires extremely strict particle control.

Fabric pretreatment normally does not pass through the inkjet printhead.

Instead, it may be applied through:

• Padding
• Coating
• Screen application
• Spray application
• Foam application
• Other fabric pretreatment equipment

Therefore, the filtration target for a viscous textile pretreatment should not simply copy an ink filter specification.

An unnecessarily fine filter may create:

• Excessive pressure drop
• Slow throughput
• Rapid filter blockage
• Loss of production efficiency

Meanwhile, a filter that is too coarse may allow defects to pass through.

The practical requirement is:

Remove process-relevant residue without creating an impractical filtration load.

Why Residue Matters Before Fabric Application

Once residue reaches the fabric, even small local defects can become visible after printing.

Các tác dụng có thể xảy ra bao gồm:

• Uneven polymer add-on
• Local areas with higher or lower alkali
• Different wetting behavior
• Ink spreading around particles
• White or dark specks
• Uneven color after fixation
• Surface contamination

The problem can be especially difficult to diagnose because the defect may appear only after digital printing, steaming or washing.

This can lead operators to suspect:

• The ink
• The printer
• The fabric
• The thickener batch

when the actual cause was incomplete pretreatment preparation or filtration.

FSX Chemical’s digital printing product guidance also treats dissolution/dispersion behavior, filtration suitability and residue as part of pretreatment evaluation rather than judging a product from viscosity alone. citeturn591004view0

Five Main Sources of Pretreatment Residue

Residue should first be classified by origin.

Residue Source	Typical Appearance	First Check
Bù nước chưa đầy đủ	Soft gel particles, fish-eyes, swollen lumps	Mixing order, powder addition, hydration time
Formula incompatibility	Flocs, coagulated particles, precipitate	Salt, alkali, pH, additive sequence
Chất lượng nước	Fine mineral haze, precipitate, instability	Hardness, calcium/magnesium, suspended solids
Foreign contamination	Fibers, dust, bag fragments, rust, tank debris	Equipment and housekeeping
Storage instability	Skin, settled solids, gel fragments	Holding time, temperature, tank cover and agitation

The correct corrective action depends on the source.

Replacing the filter alone will not solve residue that is continuously generated by poor hydration or formula incompatibility.

1. Incomplete Polymer Hydration and Fish-Eyes

Powder thickeners can form lumps when the outer surface hydrates too quickly and traps dry powder inside.

These partially hydrated particles are often called:

• Fish-eyes
• Gel lumps
• Undissolved polymer

They can survive mixing and then accumulate on a filter.

Common causes include:

• Adding powder too quickly
• Adding powder into a low-turbulence zone
• Insufficient dispersion before hydration
• Insufficient hydration time
• Incorrect water temperature
• Adding electrolyte or alkali before the polymer is sufficiently hydrated

The best filtration strategy is therefore not to create fish-eyes in the first place.

A good preparation process should produce a uniform hydrated base before the complete formula is finalized.

2. Formula Incompatibility, Salt and Alkali Agglomeration

A pretreatment can appear smooth before additives are introduced and then form residue after the full formula is prepared.

This can happen because polymer behavior changes with:

• Electrolyte concentration
• pH
• Alkali type
• Urea level
• Other auxiliaries

For reactive digital pretreatment, the complete system can contain polymer, alkali, urea and anti-reducing or process-control components.

These ingredients should be evaluated together.

If residue appears only after alkali or salt is added, investigate:

• Polymer electrolyte tolerance
• Thứ tự cộng
• Local high concentration during dosing
• Mixing intensity
• pH change

Do not approve filtration from the polymer stock solution alone if the production formula contains additional electrolytes and alkali.

3. Water Quality and Mineral Contamination

Water is a major raw material in textile pretreatment.

Hard water can contain calcium and magnesium ions, while plant water may also carry suspended particles or treatment residues.

Depending on the polymer and auxiliaries, these ions can influence:

• Bổ sung nước
• Độ nhớt
• Độ hòa tan
• Precipitation
• Long-term stability

If one factory repeatedly sees fine residue while another factory does not, compare water quality before assuming the chemical batch is different.

Useful checks can include:

• Độ cứng của nước
• Conductivity
• pH
• Visible suspended solids
• Water-treatment consistency

Where mineral-related instability is suspected, laboratory comparison using the actual plant water and a controlled reference water can help identify the cause.

4. Foreign Material from Tanks, Bags and Equipment

Not all filtration residue comes from the chemistry.

Common mechanical contamination includes:

• Fibers from bags
• Dust
• Packaging fragments
• Dried material from tank walls
• Rust or scale
• Old formulation residue from hoses
• Damaged seals

If the filter contains obviously foreign particles, increasing hydration time will not solve the problem.

Review:

• Tank cleaning
• Bag-opening practice
• Transfer hoses
• Pump cleanliness
• Tank covers
• Previous product contamination

A clean process line reduces filtration load and makes chemical troubleshooting more reliable.

5. Holding Time, Skin Formation and Storage Instability

Pretreatment that filters well immediately after preparation may behave differently after several hours or longer storage.

Possible changes include:

• Quá trình hình thành lớp biểu bì
• Thanh toán
• Gel fragments
• Sự thay đổi độ nhớt
• Microbial-related deterioration in susceptible water-based systems
• Contamination from open tanks

The intended working time should therefore be included in filtration testing.

For example, if production normally uses a prepared batch over one shift, the mill should evaluate the pretreatment at:

• Initial preparation
• Mid-holding period
• End of intended working time

This creates a more realistic stability picture than filtering only a freshly prepared laboratory sample.

How to Select a Filtration Method Without Using a Universal Mesh Number

There is no responsible universal filter mesh or micron value for every digital textile pretreatment.

The selection depends on:

• Pretreatment viscosity
• Polymer type
• Product form
• Application equipment
• Flow rate
• Pump capacity
• Residue size and type
• Required production throughput

A useful development method is to compare several filtration levels under the same preparation conditions.

For each level, record:

• Filtration time
• Pressure or pumping difficulty
• Residue amount
• Residue appearance
• Filtered viscosity
• Application uniformity
• Finished print result

The correct filter is not necessarily the finest available.

It is the filtration level that removes process-relevant residue while keeping throughput practical and leaving the intended pretreatment behavior intact.

Viscosity, Flow Rate and Filter Pressure Drop

High-viscosity pretreatments require more pressure to pass through a filter than low-viscosity liquids.

If the filter is too fine for the viscosity and available pump system, possible symptoms include:

• Very slow filtration
• Rapid filter blinding
• Excessive pump load
• Bypass risk
• Operator removal of the filter to maintain production speed

This last problem is particularly important.

A technically perfect filtration specification that operators cannot run reliably is not a good production specification.

The filtration system should therefore balance:

Residue Removal ↔ Pressure Drop ↔ Throughput ↔ Cleaning Frequency

Viscosity should always be compared using a defined method because the same nominal viscosity can behave differently under pumping shear.

Mixing Sequence Before Filtration

Filtration should normally be treated as the final control step after the pretreatment has reached the intended state for application.

A general development sequence is:

1. Prepare the required water.
2. Disperse and hydrate the polymer under the defined method.
3. Allow sufficient hydration time.
4. Add compatible auxiliaries in the validated order.
5. Add alkali/electrolytes under controlled mixing where relevant.
6. Adjust to final batch weight or concentration.
7. Allow the formula to reach the defined condition.
8. Measure pH and viscosity.
9. Filter before fabric application.

The exact sequence depends on the product and formula.

The important principle is to avoid filtering an incomplete intermediate and then allowing residue to form after the remaining additives are added.

Reactive Digital Pretreatment: What Should Be Checked?

Reactive digital pretreatment is commonly used on cotton, viscose, lyocell, modal and other suitable cellulosic fabrics.

Published technical reviews note that digital pretreatment commonly carries auxiliaries on the fabric because the ink itself must remain within strict viscosity, stability and conductivity limits. citeturn257915search0turn257915search9

In reactive systems, filtration testing should consider the complete formulation, including where relevant:

• Thickener/polymer
• Urê
• Alkali
• Anti-reducing salt
• Other auxiliaries

After filtration, evaluate:

• Độ đồng đều trong quá trình tiền xử lý
• Padding or coating behavior
• Fabric pick-up
• Bleeding
• Print edge definition
• Color after steaming and washing

Residue should therefore be treated as one part of the complete reactive printing system rather than as a standalone laboratory number.

Disperse Digital Pretreatment: What Should Be Checked?

Disperse digital printing on polyester uses different dye chemistry and fixation conditions from reactive printing.

A disperse pretreatment may involve liquid or dispersed components whose stability should be evaluated under the actual preparation and application route.

Important checks include:

• Dispersion stability
• Visible sediment
• Filtration residue
• Độ ổn định khi bảo quản
• Fabric pick-up
• Sấy khô
• Thermal fixation compatibility

FSX Chemical’s current digital printing product page also lists dispersion and filtration as key trial factors for the disperse route. citeturn591004view0

Do not automatically copy a reactive pretreatment filter specification to a disperse system.

Pigment Digital Pretreatment: What Should Be Checked?

Pigment digital printing introduces binder compatibility and curing into the evaluation.

Depending on the pretreatment, residue can come from:

• Polymer agglomeration
• Binder incompatibility
• Dispersion instability
• Auxiliary interaction

Filtration should therefore be evaluated together with:

• Pigment ink compatibility
• Binder system
• Application uniformity
• Quá trình làm cứng
• Độ bền khi cọ xát
• Cảm giác khi chạm vào vải

A filtered liquid is not automatically a technically successful pigment pretreatment if the complete binder/curing system is unstable.

How to Measure Filtration Performance Without Misreading Residue

Compare filters using a defined procedure and the complete pretreatment bath. A clean filtrate is useful only if filtration also preserves the intended formulation and provides an acceptable production flow rate.

Define the filter and operating conditions

Record filter material, effective area, opening or pore specification, rating basis, sample mass, temperature, elapsed holding time and applied pressure or liquid head. Mesh count is not a unique micron opening without the screen geometry, including wire diameter. Nominal and absolute micron labels are not interchangeable without the manufacturer’s efficiency and test information; Donaldson’s filtration terminology overview provides background on that distinction, not an approval specification for textile pretreatment.

Keep diagnostic residue separate from a gravimetric result

Observation	Suggested record	Interpretation limit
Wet retained material	Photograph and describe soft gel, grit, skin or fibers before washing	Wet mass includes retained liquid and cannot be called insoluble-solids content
Defined dry residue	Use a documented filter blank, washing and drying procedure where appropriate	Washing may dissolve or disperse diagnostic gel; the result is method-dependent
Filtration throughput	Mass passed over time at the specified head or pressure	Different viscosity, area or pressure can explain a flow difference

Use separate portions when both visual diagnosis and a residue assay are needed. Do not wash away the evidence before recording it. A soft lump that disperses under a defined check is different from persistent grit, but appearance alone does not identify its chemical composition.

Check what passes through and what is lost

Compare before-and-after viscosity using the same method, appearance and relevant solids or component measurements. A filter can remove intended formulation material as well as unwanted residue. Verify fabric application, add-on uniformity and finished-print performance after filtration. Repeated blockage should trigger investigation of hydration, compatibility, storage or contamination rather than an automatic move to a finer filter.

Production Filtration Workflow

A practical production workflow can be organized as:

Raw Water Check → Tank Inspection → Controlled Mixing → Full Hydration → Formula Completion → pH/Viscosity Check → Filtration → Clean Holding Tank → Fabric Application → Production Monitoring

Before Mixing

• Confirm tank cleanliness.
• Check water quality when variation is suspected.
• Inspect powder bags and liquid containers.

During Preparation

• Follow the validated addition sequence.
• Avoid dumping powder too quickly.
• Record mixing and hydration time.

Before Filtration

• Confirm the complete formula is finished.
• Measure pH and viscosity.
• Inspect for visible gel or sediment.

During Filtration

• Record filtration time or pressure trend.
• Inspect residue.
• Replace or clean the filter according to actual loading.

After Filtration

• Use a clean receiving tank.
• Avoid recontamination through dirty hoses.
• Apply within the validated holding time.

Residue Troubleshooting by Symptom

Symptom	First Causes to Check	Đừng vội kết luận
Soft gel lumps on filter	Hydration, powder addition, mixing time	The filter is too fine
Residue appears only after alkali	Electrolyte tolerance, local concentration, pH	The raw polymer is contaminated
Fine mineral-like sediment	Water hardness, tank scale, mineral contamination	More mixing will solve it
Fibers or dark particles	Bags, tanks, hoses, rust, housekeeping	The formulation is chemically unstable
Filter blocks rapidly but liquid looks smooth	Filter rating, viscosity, flow rate, fine gel load	A finer filter is automatically better
Fresh batch filters well; aged batch does not	Holding stability, skin formation, contamination	Initial QC alone is sufficient
Filtered batch still gives fabric specks	Receiving tank, hoses, applicator, fabric contamination	Filtration is the only contamination source

How Filtration Affects Total Cost in Use

Filtration has a cost, but poor filtration can cost more.

Possible hidden losses include:

• Discarded pretreatment
• Application-line cleaning
• Roller or screen cleaning
• Production stops
• Fabric defects
• In lại
• Vải bị loại
• Extra labor

At the same time, over-filtration can increase:

• Filter consumption
• Pump energy
• Filtration time
• Operator workload

A useful commercial framework is:

Total Cost in Use = Pretreatment Cost + Filtration Cost + Downtime + Cleaning + Rework + Quality Loss

The best filtration procedure is therefore the one that reliably removes relevant residue at a practical production throughput.

What Information Should You Send to a Pretreatment Supplier?

If your digital textile pretreatment shows filtration residue, send:

• Ink system: reactive, disperse or pigment
• Loại vải
• Current pretreatment product or TDS
• Complete pretreatment formula
• Polymer/thickener dosage
• Water source or hardness information where available
• Trình tự trộn
• Thời gian trộn
• Thời gian bù nước
• pH
• Viscosity and test method
• Filter type or rating currently used
• Photos of the residue
• Holding time before application
• Application equipment
• Current print-quality problem

FSX Chemical có thể sử dụng thông tin này thông qua Mẫu và việc kết hợp to determine whether the next test should focus on hydration, formulation compatibility, filtration or the product grade.

What Is the Best Way to Control Pretreatment Residue?

The most reliable sequence is:

Prevent Residue Formation → Complete Hydration → Verify Formula Compatibility → Filter the Final Working Pretreatment → Protect Against Recontamination → Confirm Fabric Application

Các nguyên tắc chính là:

1. Filtration should not be used to hide poor hydration.
2. Test the complete formulation, not only the stock polymer.
3. Do not copy an ink filtration rating directly to a viscous fabric pretreatment.
4. There is no universal filter mesh or micron value for every digital pretreatment.
5. Identify what the residue actually is before changing the product.
6. Judge filtration by production stability and finished print performance, not by filter appearance alone.

Các câu hỏi thường gặp

1. Why should digital textile pretreatment be filtered?

Filtration removes process-relevant particles and agglomerates that can cause uneven fabric application, specks, streaks and production instability.

2. Is pretreatment filtration the same as ink filtration?

No. Ink must pass through printhead nozzles and normally requires much stricter particle control. Fabric pretreatment is applied separately and should use a filtration level appropriate to its viscosity and application equipment.

3. What causes gel lumps in digital printing pretreatment?

Common causes include rapid powder addition, incomplete hydration, insufficient mixing or adding salt/alkali before the polymer is fully hydrated.

4. Can hard water cause filtration residue?

It can contribute in some polymer and auxiliary systems because calcium, magnesium or suspended solids can influence hydration, stability and precipitation.

5. Should I filter before or after adding alkali and auxiliaries?

For final production control, the complete working pretreatment should be evaluated after all intended components are added, because residue can form only after formula completion.

6. What filter mesh should I use for reactive digital pretreatment?

There is no universal mesh number. Select the filtration level according to product viscosity, residue size, application equipment, flow rate and production throughput.

7. Is the finest possible filter always best?

No. An unnecessarily fine filter can create high pressure drop, rapid blockage and impractical production speed without improving the final fabric result.

8. Why does a fresh batch filter well but an aged batch leave residue?

Possible causes include skin formation, settling, viscosity drift, contamination or holding-time instability.

9. Can filtration change pretreatment viscosity?

It should be checked. Heavy gel removal or high-shear pumping can affect the measured result in some systems, so compare viscosity before and after filtration under the same method.

10. Can residue cause digital print bleeding?

Residue can create local nonuniform pretreatment, which may alter ink spreading. However, bleeding can also come from fabric, pick-up, moisture, drying and ink loading.

11. Should reactive, disperse and pigment pretreatments use the same filter?

Not automatically. The product form, viscosity, dispersion behavior, auxiliaries and application equipment differ, so each route should be qualified separately.

12. What should I send FSX Chemical if my pretreatment has filtration residue?

Send your current TDS or sample, complete formula, water source, mixing/hydration method, pH, viscosity, current filter method, photos of residue and application conditions.

Evaluate Digital Pretreatment Filtration with FSX Chemical

If your digital textile pretreatment shows gel particles, sediment, rapid filter blockage or fabric specks, FSX Chemical can help review whether the issue is related to hydration, water quality, formula compatibility, filtration or product selection.

For a more useful technical comparison, send:

• Your current pretreatment product or TDS
• Reactive, disperse or pigment route
• Công thức đầy đủ
• Polymer dosage
• Water quality information
• Mixing and hydration method
• pH and viscosity method
• Current filter type or rating
• Thời gian giữ
• Application equipment
• Photos or retained residue where available
• Current printing defect or production target

Bắt đầu bằng Mẫu và việc kết hợp to establish a controlled troubleshooting direction.

Bạn cũng có thể xem lại FSX Chemical Digital Printing Paste hoặc Yêu cầu báo giá trực tiếp từ nhà máy once the technically suitable product route is clear.

For technical discussion, Liên hệ với FSX Chemical with your current preparation method, filtration conditions and residue information📧 Email: Service@fsxchemical.com

Good filtration begins before the filter. The most stable digital pretreatment process prevents unnecessary residue during hydration and formulation, removes remaining process-relevant particles before fabric application, and protects the filtered batch from recontamination.