Lista de pruebas esenciales para el control de calidad de los espesantes textiles

Quality control of a textile thickener requires more than checking whether a laboratory solution reaches a target viscosity. Two products can produce similar readings under one test condition while behaving differently during hydration, paste preparation, screen passage, printing, steaming and wash-off.

A practical quality control program should therefore combine batch-release tests with application testing. The objective is to confirm not only that the delivered material matches its specification, but also that it remains suitable for the buyer’s fabric, dye system, formulation and printing equipment.

Key takeaway: Viscosity is an essential textile thickener quality control test, but it is not a complete measure of print performance. Reliable evaluation should also cover moisture, pH, hydration, filtration, rheology, formulation compatibility, paste stability, print definition and wash-off.

What Should a Textile Thickener QC Program Confirm?

A textile thickener quality control program should answer three separate questions. Treating them as one question often leads to incorrect approvals or unnecessary batch rejection.

Does the batch match the agreed product specification?

This is the batch-release level. Typical checks may include appearance, moisture, viscosity, pH and other properties specified for the confirmed product grade.

The exact release parameters depend on the thickener chemistry. A CMC specification, for example, may include degree of substitution or related chemical data, while a formulated compound thickener may require a different control panel.

Can the material be prepared consistently?

A product may meet its basic specification but still be difficult to disperse under the customer’s preparation conditions. Hydration time, lump formation, undissolved particles and filtration residue can affect production efficiency and paste uniformity.

These properties should be evaluated using the plant’s normal water quality, mixing equipment and preparation sequence whenever possible.

Does the prepared paste perform in the intended printing process?

Application testing connects laboratory measurements with production requirements. Depending on the process, the test may cover screen passage, edge definition, penetration, colour yield, wash-off, fabric handle or storage stability.

No individual raw-material result can independently guarantee final print quality. Fabric preparation, dyes, auxiliaries, printing parameters, fixation and washing conditions must also remain controlled.

Standardize the Test Method Before Comparing Results

A viscosity value without a complete test method has limited value. Concentration, water quality, hydration time, temperature, instrument, spindle and rotational speed can all change the reported result.

Before comparing suppliers or production batches, the laboratory should document at least the following conditions:

• Sample mass and solution concentration
• Whether concentration is calculated on an as-received or dry basis
• Water type, hardness and temperature
• Powder addition sequence and mixing speed
• Tiempo de mezcla e hidratación
• Resting or deaeration time before measurement
• Viscometer or rheometer model
• Spindle or measuring geometry
• Rotational speed or shear-rate program
• Temperatura de medición
• Number of replicate measurements

A result from a 2% solution cannot be directly compared with a result from a 4% solution. Likewise, two readings obtained with different spindles or rotational speeds should not be treated as equivalent simply because both are reported in mPa·s or cP.

The agreed method should appear in the purchasing specification, internal laboratory procedure or product TDS. Any change in the method should be documented before historical results are compared.

Essential Tests for Powder and Batch Release

The following tests form a practical starting point for textile thickener quality control. Not every test belongs on every batch COA, and the appropriate panel should be selected according to the material chemistry and application risk.

Test	What It Evaluates	Why It Matters	Typical Control Level
Sampling and identification	Batch identity and sample representativeness	Prevents testing the wrong or unrepresentative material	Every received or produced lot
Apariencia	Colour, physical form, caking and visible contamination	Provides an early indication of handling or storage problems	Every lot
Moisture or loss on drying	Volatile or water content under the selected method	Affects active material, weighing and storage behavior	According to specification
Viscosidad	Apparent viscosity under fixed conditions	Supports batch consistency and grade identification	Usually every lot
pH	Acidity or alkalinity of a defined solution	May influence compatibility and paste preparation	According to grade
Tamaño de las partículas	Powder-size distribution or sieve residue	Influences dispersion, dusting and hydration rate	Qualification or routine control
Hydration and dissolution	Time to form a uniform solution or paste	Identifies lumps, slow hydration and preparation difficulty	Qualification and incoming checks
Filtration or undissolved residue	Coarse particles, gels or insoluble matter	Relevant to screen passage and digital pretreatment preparation	Application-dependent
Material-specific chemistry	DS, purity, salts, ash or other grade-specific properties	Confirms chemical consistency where relevant	Based on material and specification
Rheology and recovery	Flow across different shear conditions	Provides more process information than one viscosity reading	Qualification or investigation
Compatibilidad de las formulaciones	Response to dyes, alkali, salts, binders and process water	Detects instability not visible in water-only testing	Grade qualification
Estabilidad de la pasta	Viscosity, separation and uniformity over time	Supports production scheduling and repeatability	Qualification or periodic verification
Laboratory print trial	Transfer, sharpness, penetration, wash-off and colour response	Confirms fitness for the actual printing process	Supplier or grade approval

1. Sampling and identification

Reliable testing begins with a representative sample. The laboratory record should include the supplier, product name, grade, batch number, production or receipt date, package number and sampling location.

For a multi-bag shipment, one conveniently located bag should not automatically represent the entire lot. The sampling plan should reflect batch size, packaging and the buyer’s quality risk.

Reference and retained samples should be sealed, labelled and stored under defined conditions. They are valuable when comparing a future batch or investigating a production complaint.

2. Appearance and foreign matter

Visual inspection is a fast screening test for colour variation, caking, moisture exposure, damaged packaging and visible foreign material. The result should be compared with an approved reference rather than described only as “normal.”

Appearance alone does not confirm chemical identity or performance. A visually acceptable powder can still differ in viscosity, hydration or formulation compatibility.

3. Moisture or loss on drying

Moisture affects the amount of active material delivered in an as-received powder. It can also influence weighing accuracy, flowability, caking and storage behavior.

The drying temperature, time, sample mass and endpoint must be specified. Different loss-on-drying methods may remove different amounts of volatile material, so results from different procedures should not be compared without method review.

For CMC, ASTM D1439 includes moisture among its specified test areas. This does not mean that the same procedure or acceptance limit automatically applies to CMS, sodium alginate or a formulated compound thickener.

4. Apparent viscosity

Viscosity is commonly used for grade identification and batch release because it is practical and sensitive to polymer concentration and molecular characteristics. It should always be reported together with its test conditions.

Where possible, run duplicate preparations rather than measuring the same beaker twice. Duplicate preparation helps identify errors caused by weighing, powder addition, mixing or incomplete hydration.

A batch may pass a single-point viscosity test and still show different flow under printing shear. For a new grade, supplier change or recurring print defect, a rheological comparison is more informative.

5. pH

Measure pH at a defined concentration, temperature and hydration time. The result may help identify batch variation or predict compatibility with other paste ingredients.

There is no universal ideal pH for every textile thickener. The acceptable range should be linked to the confirmed product grade and the intended dye or pigment system.

6. Particle size, hydration and dissolution

Particle size affects how a powder wets, disperses and hydrates. Very fine powder may disperse quickly under suitable mixing but can be more difficult to add without agglomeration. Coarser material may require a longer hydration period.

A practical hydration test should record:

• Ease of powder addition
• Tendency to form surface lumps or fish-eyes
• Time required to reach a stable viscosity
• Uniformity of the prepared solution
• Foam or entrained air after mixing
• Residue after filtration or screening

Use the same mixer, vessel geometry, batch size and addition sequence when comparing products. Changing the laboratory preparation method can create a difference that is incorrectly attributed to the thickener.

7. Filtration and undissolved residue

A filtration or screen-residue test helps detect coarse particles, gels, contaminants and incompletely hydrated material. The mesh or filter size, pressure, sample volume and prepared-paste age should be documented.

For conventional screen printing, the test can support an assessment of screen passage. For digital textile pretreatment, filtration and residue are important for preparing a uniform treatment bath.

A textile pretreatment thickener should not be added directly to ink unless the ink and equipment suppliers have specifically approved that practice. Pretreatment-paste testing and ink-jetting testing are different evaluation routes.

8. Material-specific chemical properties

Some chemical tests are relevant only to certain material families. For example, a CMC quality plan may consider degree of substitution, purity, sodium chloride, sodium glycolate or density when these properties form part of the agreed specification.

Sodium alginate, CMS and compound thickeners require specifications suited to their own composition. Buyers should not copy a CMC test panel and use it unchanged for every product described as a textile thickener.

Only place a parameter on the purchase specification when its method, unit, acceptance range and connection to the application are understood.

Functional Tests for Prepared Thickener Pastes

9. Rheology and shear recovery

Printing pastes experience different shear conditions during storage, pumping, screen passage, transfer to the fabric and leveling after application. A single rotational speed shows only one part of this behavior.

A rheometer or multi-speed viscometer can be used to compare viscosity across a defined shear range. Depending on the laboratory capability, the program may also evaluate thixotropy, yield behavior or recovery after high shear.

The purpose is not to identify one universally correct flow curve. It is to establish a reproducible profile that correlates with acceptable performance on the buyer’s equipment.

10. Formulation compatibility

Water-only viscosity does not show how a thickener responds to a complete printing formulation. Salts, alkali, acids, dyes, pigments, binders and other auxiliaries may change the final paste structure.

Compatibility testing should use the intended formulation and actual addition sequence. Useful observations include viscosity change, gel formation, precipitation, separation, colour variation and filter residue.

Water quality should also be controlled. Multivalent ions and variable hardness can affect some anionic polysaccharide systems, including alginate-based pastes. Testing with both standardized water and plant water can help separate raw-material variation from water-related effects.

11. Prepared-paste stability

Paste stability testing monitors whether a prepared system remains usable during the required production window. The laboratory may record viscosity, pH, separation, surface skin, sediment, odour changes or filtration behavior at defined intervals.

Storage temperature, container closure, sampling method and observation times should reflect the plant process. An accelerated test can be useful for comparison, but it should not be presented as a direct shelf-life claim unless the correlation has been validated.

Printing Performance Tests

A laboratory print trial is the most direct way to determine whether a candidate thickener is fit for an application. Use an approved current product as the control and change only the thickener whenever the formulation allows.

12. Screen passage and paste transfer

For flat-screen or rotary-screen printing, observe how the paste moves across and through the screen. Record screen passage, paste build-up, transfer uniformity and any visible blocking or foaming.

Laboratory equipment cannot reproduce every production variable, but it can identify obvious differences before a plant-scale trial. Mesh specification, squeegee settings, print speed and fabric should remain consistent across comparisons.

13. Print sharpness, migration and penetration

Print sharpness should be assessed with a controlled test design containing fine lines, corners, open areas and larger colour blocks. Compare edge spreading, line width, missing detail and colour uniformity.

Penetration should be evaluated according to the desired printing style. Excessive penetration may reduce face colour or definition, while insufficient penetration may be unsuitable for products requiring colour coverage through the fabric structure.

Use standardized image analysis where available. If visual assessment is used, establish reference samples and controlled viewing conditions.

14. Colour yield

Colour yield can be compared instrumentally or by an internally validated colour-strength procedure. The same fabric, dye lot, recipe, print deposit, drying, fixation and washing conditions must be used.

A colour difference does not automatically prove a thickener-quality problem. Paste add-on, fabric absorbency, dye concentration, steaming moisture, fixation conditions and washing efficiency should be reviewed before assigning the cause.

15. Wash-off and fabric handle

Wash-off testing assesses how readily unfixed colour and thickener residue can be removed under the intended washing sequence. Observe wash-water behaviour, residual surface film, fabric appearance and handle after drying.

The washing recipe, liquor ratio, temperature, time and mechanical action should be fixed. Changing these conditions can conceal or exaggerate a difference between thickeners.

Claims such as “complete wash-off” or “zero residue” should be avoided unless they are supported by a defined method and confirmed acceptance criteria.

16. Colourfastness

Fastness testing may include laundering, wet and dry rubbing or other end-use requirements. Applicable methods can include AATCC TM61 for accelerated laundering and AATCC TM8 for crocking, subject to the buyer’s market and specification.

Colourfastness is a property of the completed printed and processed textile. It depends on the dye or pigment, fibre, fixation, binder where applicable, washing and finishing—not on the thickener alone.

Fastness should therefore be used as a system-validation result rather than a routine claim that a raw thickener independently guarantees.

Recommended Test Panels by Printing Process

Ruta de impresión	Priority Tests	Important Process Variables
Serigrafía reactiva	Viscosity, rheology, alkali and dye compatibility, sharpness, colour yield, wash-off and handle	Cellulosic fabric, reactive dye type, alkali, steaming and washing
Disperse screen printing	Paste stability, screen passage, print definition, penetration, fixation response and wash-off	Polyester construction, disperse dye, drying and thermal fixation
Impresión con pigmentos	Binder compatibility, rheology, print definition, handle and rubbing or laundering fastness	Pigment dispersion, binder, catalyst, curing and fabric finish
Pretratamiento digital reactivo	Hydration, filtration, treatment uniformity, storage stability, bleeding control and colour response	Fabric pretreatment, ink system, drying, steaming and washing
Direct disperse digital pretreatment	Filtration, compatibility, coating uniformity, edge definition and thermal-process response	Polyester substrate, ink, pretreatment add-on and fixation route

The table is a starting framework, not a universal product specification. Each mill should remove irrelevant tests and add customer-specific requirements based on its process risk.

How Often Should Each Test Be Performed?

Running every possible test on every batch is rarely practical. A risk-based plan separates routine release tests from qualification and periodic verification.

Etapa de control	Recommended Test Level	Purpose
Supplier qualification	Full physical, chemical, compatibility and printing evaluation	Confirm that the product route is suitable before purchasing
First commercial batches	Routine incoming tests plus selected application trials	Confirm transfer from sample approval to bulk supply
Routine incoming inspection	Identity, appearance and selected critical specification checks	Verify batch consistency efficiently
Periodic verification	Expanded rheology, compatibility and laboratory print testing	Confirm continued application performance
Supplier or process change	Targeted requalification	Evaluate the effect of a changed raw material, method or process
Complaint investigation	Retained-sample comparison and expanded testing	Separate material, preparation and process causes

The actual frequency should be documented in the buyer’s control plan. High-risk applications, new suppliers and unstable processes may require more frequent verification than established product routes.

How to Investigate an Out-of-Specification Result

An unexpected result should not be accepted or rejected without checking whether the test itself was valid. Begin by reviewing the sample identity, preparation record, instrument condition and calculation.

1. Place the material on hold. Prevent unintended use while the result is reviewed.
2. Check sample traceability. Confirm the product, batch, package and sampling record.
3. Review the test method. Check concentration, water, mixing, hydration, temperature, spindle and speed.
4. Verify instrument status. Confirm calibration or performance checks and inspect the measuring system.
5. Prepare a new test sample. Do not rely only on repeating a reading from the original beaker.
6. Compare retained samples. Test an approved batch and the supplier’s retained sample where available.
7. Review production variables. Consider water quality, formula, fabric, dye, machine and fixation conditions.
8. Document the conclusion. Record whether the cause relates to the material, test method or application process.

Repeated testing should not be used only to obtain a passing number. The laboratory procedure should define when retesting is allowed and how all original and repeat results are recorded.

What Buyers Should Request from a Supplier

Before approving a textile thickener for bulk purchasing, request enough information to reproduce the supplier’s test result and evaluate the grade in your own process.

• Current Technical Data Sheet for the proposed grade
• Safety Data Sheet for handling and internal review
• Método completo de ensayo de viscosidad
• Relevant specification parameters and units
• Certificado de análisis específico del lote para el envío confirmado
• Representative pre-shipment or evaluation sample where agreed
• Recommended preparation and hydration procedure
• Información sobre el empaque y el almacenamiento
• Change-notification expectations
• Technical contact for result review and grade matching

A COA confirms only the tests and specification shown on that document. It does not replace the buyer’s application trial or guarantee results under every printing condition.

If replacing an existing grade, provide the supplier with the current TDS, test method, approved sample and main production issue. A comparison based only on product name or nominal viscosity can lead to an unsuitable recommendation.

How FSX Chemical Supports Grade and Batch Evaluation

FSX Chemical supplies CMC, CMS, alginato de sodio y pasta para impresión digital routes for textile printing applications.

For an initial grade review, buyers can provide:

• Proceso de impresión y tipo de máquina
• Fabric and dye or pigment system
• Current thickener grade, TDS or physical sample
• Target viscosity and complete measurement method
• Paste formulation and preparation procedure
• Current issue, such as slow hydration, unstable viscosity, poor definition or difficult wash-off
• Required packaging, estimated volume and destination📧 Correo electrónico: Service@fsxchemical.com

Based on the available information, the team can review the appropriate product route and prepare a sample for the buyer’s laboratory testing. TDS and SDS can be supplied for the selected product, while batch-specific COA information should be confirmed against the actual product and production batch.

Final approval should be based on the customer’s laboratory or production trial. Results may vary with formulation, fabric, water quality, equipment, fixation and washing conditions.