Cara Membaca Lembar Data Teknis (TDS) Sodium Alginat: Panduan Setiap Parameter

Hampir setiap keputusan pembelian sodium alginat dimulai dari lembar data teknis (TDS). Namun, format dan istilah TDS berbeda antar pemasok, dan tidak semua kolom sama pentingnya untuk setiap aplikasi. Panduan ini menjelaskan TDS sodium alginat secara bertahap, bagian demi bagian.

Kolom Identifikasi Produk

Nama Produk dan Penetapan Grade

The product name or grade code identifies the specific product within a supplier’s range — for example, distinguishing a textile-grade product from a food-grade or pharmaceutical-grade product, or distinguishing between viscosity tiers within the textile range. Confirm that the grade name matches what you intend to order; grade codes are sometimes similar between different specifications, and ordering the wrong code is a preventable but real sourcing error.

CAS Number

Sodium alginate has the CAS registry number 9005-38-3. This number identifies the chemical substance itself, not a specific grade or purity level — all sodium alginate products, regardless of viscosity or purity grade, share this CAS number. A correct CAS number on a TDS confirms you are looking at documentation for sodium alginate specifically, but it does not tell you anything about the grade’s suitability for your application — that requires reviewing the specification fields below.

Intended Application

A well-prepared TDS states the intended application for the grade — for example, “textile printing thickener” versus “food additive” versus “pharmaceutical excipient.” This field is important because it indicates what the grade was formulated and tested for. As discussed in our guide to food-grade versus industrial-grade differences, using a grade outside its intended application can mean missing performance characteristics your process needs, or paying for purity your application doesn’t require.

Physical and Chemical Specification Fields

Penampilan

Typically describes the product as a white to off-white (sometimes light yellow) powder or granule. This field is mainly useful for incoming inspection — confirming visually that a received shipment matches the expected appearance before more detailed testing.

Viskositas

The most commercially important specification field for most textile applications. Viscosity is reported as a numerical range (e.g., “200–400 mPa·s” or “800–1200 mPa·s”) along with the measurement conditions: concentration (commonly 1% solution), temperature (commonly 25°C), and sometimes the specific viscometer spindle and speed used.

The measurement conditions matter as much as the number itself — a viscosity value without stated concentration and temperature is not directly comparable to another supplier’s value, even if the numbers look similar. When comparing TDS documents from different suppliers, confirm that viscosity measurement conditions match before treating the values as comparable.

M/G Ratio and Molecular Structure (When Relevant)

Degree of substitution (DS) is not a sodium alginate specification; it applies to substituted polymers such as CMC. If a sodium alginate TDS lists DS, ask the supplier to clarify the parameter and test method rather than using it for grade comparison.

Some specialist documents may report the mannuronic-to-guluronic acid ratio (M/G ratio) or other structural information. These values can influence gel behavior, but they are not always routine textile-grade purchasing fields. For printing, a defined viscosity method, purity or active-content basis, moisture, pH, insoluble matter, particle size, filtration and multi-batch consistency are usually more actionable.

Active Content / Assay

Reports the percentage of the dry product that is actual sodium alginate polymer, as distinct from residual impurities. As discussed in our guide to purity specifications, this is usually reported on a dry basis and should be read alongside the moisture content field to understand effective active content as received.

Kadar Air

The percentage of water in the product as packaged. This affects both the effective active content (as discussed above) and the product’s susceptibility to clumping and microbial degradation during storage, as covered in our storage guide. A moisture specification that is notably higher than typical industry range for the grade type is worth asking about.

pH (Larutan 1%)

Reports the pH of a standard concentration solution, typically expected in a near-neutral to mildly alkaline range (roughly pH 6–8) for unmodified sodium alginate. A pH value significantly outside this typical range may indicate a non-standard product or warrant a question to the supplier about why.

Ukuran Partikel / Mesh

Reports the mesh classification or particle size range, as covered in our guide to mesh size. Relevant primarily for predicting dissolution behavior and selecting an appropriate grade for your mixing equipment and preparation method, rather than for final paste performance once fully dissolved.

Impurity and Purity-Related Fields

Sodium Chloride (NaCl) Content

Reports the maximum residual NaCl as a percentage of the product. As discussed in our purity guide, NaCl content affects paste viscosity (through ionic interaction with the polymer) and is one of the more practically significant impurity parameters for textile printing applications.

Water-Insoluble Matter

Reports the maximum percentage of material that does not dissolve under standard test conditions — directly relevant to screen blockage risk in fine-mesh printing, as covered in our purity and troubleshooting guides. Lower values indicate cleaner dissolution behavior.

Heavy Metal Content

May be reported as a single “total heavy metals” figure, or as individual values for specific metals (lead, arsenic, mercury, cadmium) depending on the grade and intended market. Relevant primarily where buyer specifications include heavy metal limits for textile chemicals, or for food-grade and higher-purity applications where heavy metal control is a standard quality parameter.

Microbiological Fields (Where Present)

Industrial textile-grade sodium alginate TDS documents do not always include microbiological specifications, as this is more commonly associated with food or pharmaceutical-grade products. If your application has specific microbial limit requirements (uncommon for textile printing but possible in certain specialty applications), confirm whether this testing is available rather than assuming it is included by default on an industrial-grade TDS.

Regulatory and Compliance Statement Fields

How to Read Compliance Claims Correctly

TDS documents sometimes include statements referencing regulatory frameworks — REACH, food additive regulations, or other standards. The critical skill here is distinguishing a specific, verifiable claim from a general assurance. A specific claim includes a standard name, the relevant clause or substance list, and ideally a certificate or registration number you can independently verify. A general assurance simply states “compliant with international standards” without specifics.

As discussed in our guide to customization claims, treat compliance statements without verifiable specifics with caution, and request the underlying documentation (registration numbers, test reports, certificate validity dates) for any compliance claim that is material to your sourcing decision.

Standards That Apply to Food-Grade vs. Industrial-Grade Products

Be alert to TDS documents that reference food additive standards (such as national food additive codes, food chemical codices, or food-grade pharmacopoeia standards) in the context of an industrial textile product. As covered in our food-grade versus industrial-grade guide, these are different regulatory frameworks serving different purposes, and a food additive standard reference on an industrial textile product TDS is either a documentation error or a sign that the product positioning is unclear — both worth clarifying with the supplier directly.

Storage and Shelf Life Fields

A complete TDS includes recommended storage conditions (temperature, humidity, packaging integrity) and a shelf life statement (typically expressed as a duration from manufacture date under specified storage conditions). As covered in our storage guide, these fields are directly relevant to your incoming quality control and inventory management practices, not just a formality.

Sodium Alginate TDS Field-by-Field Decision Table

What to Do When TDS Information Is Incomplete

Common Gaps and How to Address Them

It is common for a standard TDS to omit some fields that matter for your specific application — a complete viscosity measurement method, filtration or insoluble-matter limits, or specific impurity data beyond the headline figures. This is not necessarily a red flag; it often simply reflects that the standard document wasn’t built with your specific use case in mind.

The appropriate response is to request the missing information directly, referencing the specific field and why it matters for your application. A supplier’s willingness and ability to provide this additional detail — versus deflecting the request — is itself useful information for your supplier evaluation, as discussed in our supplier evaluation guide.

Requesting Batch-Specific Data (CoA) Alongside the TDS

Remember that a TDS describes the specification range for a grade — it is not a guarantee of any specific batch’s actual values. For batch-specific confirmation, request a Certificate of Analysis (CoA) matching the lot you are receiving, and compare the CoA values against the TDS range to confirm the batch falls within specification.

Sodium Alginate TDS FAQ

Is a TDS the same as a batch COA?

No. A TDS describes the grade, intended use and typical or guaranteed specification framework. A COA reports results or conformity for a specific production batch. Use both documents and confirm that the grade code and methods match.

Can two sodium alginate viscosity values be compared directly?

Only when the concentration, temperature, instrument, spindle, speed, hydration and reading time are equivalent. A viscosity number without the method is not a reliable basis for grade or price comparison.

What should a buyer do if DS appears on a sodium alginate TDS?

Ask the supplier to identify exactly what the field means and which method is used. DS is normally associated with substituted polymers such as CMC, not sodium alginate, so it should not be treated as a standard alginate grade parameter.

What if an important TDS field is missing?

Request the specific method and limit in writing, review a representative COA and test a sample. A missing field is not automatically disqualifying, but the buyer should not assume an unstated value before sample or bulk approval.

How FSX Chemical Approaches TDS Documentation

FSX Chemical provides technical datasheets with full specification detail — including viscosity measurement conditions, active content or purity basis, pH, NaCl where specified, water-insoluble matter, moisture, and mesh classification — for our sodium alginate grades. Batch-specific certificates of analysis are provided as standard documentation alongside every order.

If a TDS field is unclear or if you need additional technical detail not included in our standard documentation, our technical team can provide clarification or additional test data relevant to your evaluation.

Langkah selanjutnya:

• Ajukan Permohonan TDS — review the full specification for the grade relevant to your application
• Ajukan Permohonan CoA — confirm batch-specific values before or upon receipt of your order
• Minta Sampel — verify performance against the TDS specification in your own preparation and process conditions
• Hubungi Tim Teknis Kami — for clarification on any specification field or additional technical data relevant to your sourcing decision📧 Email: Service@fsxchemical.com