Bandingkan 5 Pasta Cetak Digital Terbaik untuk Pencetakan Tekstil dengan Printer Inkjet

Pilihan pasta cetak digital harus didasarkan pada komposisi kimia tinta, jenis kain, metode aplikasi, dan perlakuan lanjutan. Panduan ini membandingkan berbagai metode pretreatment, yaitu natrium alginat, CMC, CMS, polimer sintetis, dan campuran, untuk pencetakan inkjet tekstil.

There is no single digital printing paste that is best for every inkjet textile process. Reactive ink on cotton, disperse ink on polyester and pigment ink on blended fabric require different pretreatment chemistry, coating behavior, fixation and washing conditions.

The five options in this guide are formulation routes rather than a ranking of commercial brands. They represent common directions that textile printing mills and technical buyers may evaluate when selecting a fabric pretreatment or digital printing auxiliary.

Final selection should always be confirmed by a controlled sample trial using the actual fabric, ink, printer, drying system and fixation process.

What “Digital Printing Paste” Means in Textile Inkjet Printing

In digital textile printing, the term “printing paste” often refers to a pretreatment or coating formulation applied to the fabric before inkjet printing. It may contain a thickener together with alkali, humectants, wetting agents, salts, binders or other application-specific auxiliaries.

Its function is to control the interaction between the ink droplets and the textile surface. Depending on the system, the pretreatment can influence spreading, penetration, colorant fixation, line definition, wash-off and fabric handle.

Penting: Conventional high-viscosity textile printing paste should not be fed into an inkjet printhead. The paste discussed in this article is normally applied to the fabric by padding, coating or spraying unless the equipment and ink supplier specify another method.

What a Digital Printing Paste Needs to Control

• Uniform fabric pickup or coating weight
• Ink-droplet spreading on the textile surface
• Penetration into the yarn and fabric structure
• Migration during drying and fixation
• Availability of fixation chemicals near the print surface
• Color yield and shade consistency
• Line sharpness and small-detail reproduction
• Wash-off or curing behavior
• Final fabric handle

These properties depend on the complete formulation. The main thickener chemistry is important, but viscosity alone does not determine the final result.

Quick Comparison of the Top Five Digital Printing Paste Routes

Paste Route	Typical Evaluation Direction	Main Selection Strength	Main Technical Risk
Sodium alginate-based paste	Reactive inkjet printing on cotton, viscose and selected cellulose fabrics	Established reactive-dye compatibility and wash-off route	Water quality, polyvalent ions, viscosity grade and insoluble residue
CMC or cellulose-ether paste	Selected reactive, acid and specialty inkjet pretreatments	Water retention, viscosity control and adjustable film behavior	Grade-dependent dye interaction, residual film and handle
CMS-based paste	Selected cost-focused or blended pretreatment formulations	Paste body and potential cost-in-use adjustment	Process-specific wash-off, penetration and residue behavior
Synthetic polymer paste	Pigment and selected disperse, reactive or specialty pretreatments	High thickening efficiency and tunable rheology	Film formation, binder compatibility, handle and compliance review
Application-specific compound paste	Reactive, disperse or pigment systems matched to a defined process	Reduced formulation work and route-specific performance	Proprietary composition, limited flexibility and supplier dependence

1. Sodium Alginate-Based Pretreatment Paste

Sodium alginate is an established thickener route for reactive dye printing. Its anionic structure generally provides limited interaction with anionic reactive dyes compared with many polysaccharides containing more available reactive hydroxyl groups.

In reactive inkjet printing, an alginate-based pretreatment can help hold alkali and other fixation auxiliaries near the fabric surface while controlling droplet spreading and penetration.

Typical application direction

• Reactive dye inkjet printing on cotton
• Reactive printing on viscose and selected cellulose fabrics
• Selected reactive or acid inkjet pretreatment formulations
• Benchmark testing for alternative thickener systems

Potential advantages

• Established use in reactive dye printing
• Suitable starting point for reactive ink compatibility
• Controlled surface viscosity and ink penetration when correctly formulated
• Water-removable thickener route after fixation

Limitations and purchasing checks

Sodium alginate performance can be affected by viscosity grade, molecular structure, particle size, insoluble matter, storage condition and water quality. Calcium or other polyvalent ions may change solution behavior or contribute to gel formation.

Buyers should request the viscosity test method, recommended concentration, pH, moisture, solubility information and preparation procedure. The sample should be tested using the mill’s actual water and reactive ink system.

Best starting point when

An alginate-based route is a practical starting point when the mill prints reactive inks on cellulose fibers and prioritizes established dye compatibility, print definition and controlled wash-off.

2. CMC and Cellulose-Ether-Based Digital Printing Paste

Carboxymethyl Cellulose (CMC) and other cellulose ethers can be used to control viscosity, water retention and film formation in selected textile inkjet pretreatments.

Their performance depends strongly on chemical substitution, molecular weight, solution rheology and interactions with the fabric and dye system. Two cellulose-ether products should not be assumed to be interchangeable because they share the same general chemical family.

Typical application direction

• Selected reactive inkjet pretreatments
• Reactive or acid printing on wool and silk where a tested grade is suitable
• Blended formulations with sodium alginate or another thickener
• Pretreatments requiring additional water retention or film control

Potential advantages

• Flexible viscosity and water-retention adjustment
• Cold-water-soluble grades are available
• Useful as a rheology modifier in blended systems
• Different DS and viscosity routes can be evaluated for grade matching

Limitations and purchasing checks

In reactive systems, an unsuitable CMC grade may interact with dyes or contribute to difficult wash-off and a firmer fabric handle. Degree of substitution is relevant, but it is not the only selection parameter.

Buyers should compare DS, viscosity method, solution clarity, hydration, substitution route, salt tolerance and complete-formulation compatibility. Final approval should include printing, steaming and washing.

Best starting point when

A CMC or cellulose-ether route can be evaluated when the mill needs adjustable water retention, rheology modification or an alternative pretreatment film structure and can complete grade-specific compatibility testing.

3. CMS-Based Digital Printing Paste

Carboxymethyl Starch (CMS) is a modified starch polymer used as a thickener in several textile printing applications. In digital pretreatment, it may be evaluated as a cost-focused component or as part of a compound thickener system.

CMS should not be treated as a universal direct replacement for sodium alginate or CMC. Its performance varies with starch source, degree of substitution, molecular structure, active content and manufacturing process.

Typical application direction

• Selected disperse or reactive pretreatment trials
• Cost-performance adjustment in compound printing pastes
• Blended thickener systems requiring additional paste body
• Processes where a CMS grade has already been application-tested

Potential advantages

• Can provide substantial paste body
• May support formulation cost adjustment
• Can be combined with other polymers to modify flow behavior
• Multiple viscosity routes can be developed for different application methods

Limitations and purchasing checks

Depending on grade and dosage, CMS may produce different penetration, residue, wash-off and fabric-handle results. A high solids requirement can reduce the expected cost advantage if more material and washing are needed.

Buyers should compare application viscosity, active dosage, hydration, filtration, coating uniformity, wash-off and final handle. Published results from one fabric or printing recipe should not be generalized to all CMS grades.

Best starting point when

CMS is most appropriate as a trial route when the mill wants to evaluate cost in use or blended-paste performance and has the ability to test the complete pretreatment and post-treatment process.

4. Synthetic Polymer Pretreatment Paste

Synthetic thickeners may include polyacrylate, polyacrylamide or other engineered polymer systems. They can provide high thickening efficiency at relatively low dosage and can be designed for specific pH, electrolyte or application conditions.

This route is especially relevant to pigment inkjet pretreatment and compound formulations containing binders or cationic components. Selected synthetic polymers may also be used in reactive, acid or disperse pretreatments.

Typical application direction

• Pigment inkjet printing on cotton, polyester or blends
• Pretreatments containing binder or fixation polymers
• Low-solids formulations requiring strong viscosity development
• Specialized coating and surface-modification systems

Potential advantages

• High thickening efficiency
• Rheology can be engineered for padding, coating or spraying
• Low dosage may reduce the amount of thickener solids
• Specialized electrolyte- or pH-tolerant grades are available

Limitations and purchasing checks

Synthetic polymers may form films that influence fabric handle, absorbency or washing. Performance also depends on neutralization, pH, electrolyte loading and compatibility with binders and cationic pretreatment agents.

Buyers should request information about solids, activation conditions, residual monomers where relevant, restricted-substance compliance, storage stability and binder compatibility. A generic “acrylic thickener” description is not sufficient for technical selection.

Best starting point when

A synthetic route is a practical candidate for pigment systems, specialized coatings or processes requiring efficient viscosity development and tunable application rheology.

5. Application-Specific Compound Digital Printing Paste

A compound digital printing paste combines two or more thickeners or functional components into a product designed for a defined ink, fabric or application route. It may be supplied as a powder, liquid concentrate or ready-to-dilute system.

Compound products are intended to reduce formulation work and balance properties that may be difficult to obtain from one polymer. Research on pretreatment systems has shown that combining thickeners with different structures can change ink penetration and coloring behavior.

Typical application direction

• Reactive inkjet pretreatment for cellulose fabrics
• Disperse direct-printing pretreatment for polyester
• Pigment printing pretreatment containing binder-compatible components
• Customer-specific formulations matched to existing production

Potential advantages

• Designed around a defined application route
• Can balance viscosity, coating, penetration and wash-off
• Reduces the number of raw materials weighed by the mill
• May simplify preparation and batch control

Limitations and purchasing checks

Compound formulations may provide less flexibility when the mill needs to adjust one property independently. Their detailed composition may also be proprietary, increasing reliance on supplier consistency and change control.

Buyers should confirm the exact ink route, fabric, application method, dosage, pH, storage stability, filtration and post-treatment instructions. Sample-to-bulk consistency is especially important.

Best starting point when

A compound paste is appropriate when the mill wants a route-specific starting formulation, fewer preparation steps and technical matching based on its existing process.

How to Match Paste Type to Ink and Fabric

Ink and Fabric Route	Practical Starting Direction	Critical Evaluation Points
Reactive ink on cotton or viscose	Sodium alginate or application-specific reactive compound paste	Alkali compatibility, ink spreading, color yield, fixation and wash-off
Reactive or acid ink on wool or silk	Tested alginate, CMC, cellulose-ether or compound route	Fabric surface, penetration, steaming, sharpness and handle
Disperse direct ink on polyester	Disperse-specific compound, CMS blend or synthetic polymer route	Migration, drying, thermofixation, penetration and residue
Sublimation transfer printing	Confirm whether fabric pretreatment is required at all	Transfer paper, ink, polyester content, heat transfer and migration
Pigment ink on cotton or blends	Synthetic or pigment-specific compound pretreatment	Binder compatibility, color gamut, curing, dry and wet rubbing

Some modern ink systems are designed to reduce or eliminate conventional fabric pretreatment. Buyers should follow the ink and printer supplier’s approved workflow rather than assuming that every process requires a thickened coating.

How to Test a Digital Printing Paste Sample

Step 1: Define the current production system

Record the fabric, ink type, printer, pretreatment application method, drying, fixation and washing process. Use the current approved paste as the reference.

Step 2: Standardize paste preparation

Record concentration, water quality, addition order, mixer speed, mixing time, hydration time and sample temperature. Prepare repeat samples when possible.

Step 3: Measure viscosity and rheology

State the instrument, spindle, rotational speed, concentration, temperature and conditioning time. For shear-dependent materials, use more than one speed or an appropriate rheological method.

Step 4: Check complete formulation compatibility

Add the actual alkali, humectant, salt, binder, cationic agent or other auxiliaries. Measure pH, viscosity, filtration and storage stability after the complete formulation is prepared.

Step 5: Apply pretreatment uniformly

Use a controlled padding, coating or spraying method. Record wet pickup, coating weight, line pressure, speed and drying conditions.

Step 6: Print a diagnostic design

Include fine lines, reverse lines, dots, solid areas, gradients and adjacent colors. Use the same printer settings and ink lot for every candidate.

Step 7: Apply identical post-treatment

Keep steaming, thermofixation, curing, washing or reduction-clearing conditions constant. Different post-treatment conditions can hide or exaggerate paste differences.

Step 8: Evaluate the final fabric

• Line width and edge definition
• Ink penetration and strike-through
• Color strength and color gamut
• Shade and levelness
• Wash-off or curing behavior
• Dry and wet rubbing fastness
• Washing fastness where required
• Pegangan dari kain
• Residual film or surface deposits

Buyer Comparison Matrix

Selection Parameter	What to Request	Mengapa Hal Ini Penting
Recommended application	Ink, fabric and pretreatment route	Prevents selection by product name alone
Viskositas	Value plus concentration, temperature, spindle and speed	Allows meaningful supplier comparison
Solids or active dosage	Recommended use level and calculation basis	Supports cost-in-use calculation
Hydration and preparation	Mixing order, time and temperature	Affects production practicality
pH and electrolyte tolerance	Recommended formulation range	Influences compatibility and viscosity stability
Filtration or residue	Applicable filter or screen test	Supports coating uniformity and process cleanliness
Penyimpanan	Powder and prepared-paste storage guidance	Reduces viscosity drift and contamination risk
Batch control	TDS, sample and batch COA where applicable	Supports repeat purchasing
Compliance	SDS and applicable current supporting documents	Supports supplier and market review

Common Mistakes When Comparing Digital Printing Pastes

Choosing one paste for every ink system

Reactive, disperse and pigment inks use different fixation mechanisms. Pretreatment chemistry should be matched to the actual ink and fiber.

Comparing viscosity values from different methods

Values measured at different concentrations, temperatures, spindle speeds or hydration times are not directly comparable.

Testing only color strength

High color strength does not automatically mean good line definition, levelness, fastness, handle or production stability.

Ignoring pretreatment pickup

Two fabrics can produce different results even with the same paste if the applied quantity is not controlled.

Dengan asumsi bahwa polimer alami secara otomatis memenuhi persyaratan

Natural origin does not confirm the status of preservatives, additives, impurities or the complete commercial formulation. Review the exact product documents.

Calculating cost from price per kilogram only

Compare the active dosage, preparation time, stability, washing demand and reject risk. A lower-priced product may not provide the lowest total cost in use.

Digital Printing Paste Support from FSX Chemical

FSX Chemical supplies sodium alginate, CMC, CMS and application-specific digital printing paste routes. Grade selection is based on the customer’s ink system, fabric, pretreatment method and target performance.

To request a sample or grade-matching review, provide:

• Reactive, disperse, pigment or acid ink system
• Komposisi serat dan konstruksi kain
• Padding, coating or spraying method
• Current pretreatment formulation
• Current product TDS or physical sample
• Target viscosity with complete test conditions
• Wet pickup or coating-weight target
• Drying, fixation and washing process
• Main issue, such as bleeding, penetration, low color or hard handle

FSX Chemical can use this information to recommend a practical sample route. Final suitability should be confirmed on the customer’s actual production equipment before bulk purchasing.

Need Help Selecting a Digital Printing Paste?

Send FSX Chemical your fabric, ink system, current formulation, viscosity method and target print performance. Our team can review whether a sodium alginate, CMC, CMS or application-specific compound route should be tested📧 Email: Service@fsxchemical.com