Acrylic Thickener for High-Pigment and White Printing Pastes: Rheology, Screenability and Fabric Hand

High-pigment and opaque white pastes need more than high viscosity. Acrylic thickener must balance low-shear...

Select an acrylic thickener for opaque white pigment printing by testing the actual white dispersion, binder, fabric and screen. Confirm stable holding, useful flow through the screen and a uniform cured deposit. Opacity, rubbing fastness and hand must be evaluated together: higher viscosity, more pigment or a heavier print does not automatically give the best result. Measure deposited pigment and binder separately before attributing a change to thickener efficiency.

What Changes in High-Pigment and White Printing Pastes?

The main difference is the total solids burden placed on the rheology system.

Compared with a normal pigment shade, a high-pigment or opaque white paste can contain more:

  • Pigment solids
  • Binder solids
  • Диспергатор
  • Поверхностно-активное вещество
  • Defoamer demand
  • Общее количество осажденных твердых веществ

As pigment loading rises, the acrylic thickener must control not only water but also a denser suspension of solid particles.

The useful rheology therefore becomes:

Low-Shear Stability → Shear Thinning → Screen Passage → Controlled Recovery → Leveling → Stable Deposit

not simply:

Highest Viscosity Possible.

Why Opaque White Paste Is More Demanding

Opaque white printing is designed to hide the underlying fabric color.

On dark fabrics, that requires enough:

  • White pigment concentration
  • Optical hiding power
  • Uniform surface coverage
  • Binder film

Commercial opaque whites therefore tend to carry a higher pigment and binder burden than transparent or light-shade pastes.

This creates a more difficult balance between:

  • Opacity
  • Screenability
  • Прокачка
  • Тканевая ручка

A thick paste can improve surface hold but become difficult to pass through the screen.

A fluid paste can screen easily but lose opacity through excessive penetration or uneven deposit.

Why Titanium Dioxide Changes the Rheology Problem

Titanium dioxide is widely used as an opacifying white pigment because of its high light-scattering and hiding ability.

Not every commercial white paste uses exactly the same pigment package, but high-opacity textile whites commonly rely heavily on TiO2.

Compare white and coloured pastes on a declared basis. Pigment mass fraction, particle volume fraction and pigment surface area are different quantities; titanium dioxide is denser than many organic pigments. A higher pigment percentage by weight does not by itself prove more particle crowding or a proportional increase in binder demand. The following are possibilities to investigate in the actual dispersion package, not automatic consequences of using TiO₂:

  • High suspended-solids volume
  • Strong particle-particle interactions
  • Higher dispersant demand
  • Higher binder demand

The rheology system must therefore support a particle-rich suspension without becoming excessively elastic, pasty or difficult to screen.

This is why white-paste thickener selection should be performed in the actual white pigment / binder system.

High Solids, Particle Crowding and Yield Stress

As pigment solids increase, particles occupy more of the liquid volume.

At sufficiently high solids, particle crowding can increase resistance to flow.

This can raise:

  • Apparent viscosity
  • Yield stress
  • Mixing torque
  • Pumping demand

At the same time, surfactants and electrolytes introduced with the pigment dispersion can reduce acrylic-thickener efficiency.

The final effect can therefore be nonlinear.

High pigment loading can:

  • Increase viscosity through particle crowding
  • Reduce viscosity through dilution or electrolyte effects
  • Leave low-shear viscosity similar while changing high-shear behavior

Measure the actual complete paste rather than predicting from pigment percentage.

Why One Viscosity Number Is Not Enough

High-pigment paste can have the correct Brookfield viscosity but still print poorly.

Possible reasons include:

  • Too much yield stress
  • Insufficient shear thinning
  • Slow screen release
  • Excess elasticity
  • Poor leveling

Assess screen passage, transfer and leveling with the actual paste. If yield stress or viscoelasticity is part of the explanation, use an appropriate rheological measurement and record the method. A multi-speed Brookfield comparison or a visual filament screen alone does not establish all of those properties.

For white paste, the correct question is:

Does the paste flow through the screen, deposit enough opaque material, recover without spreading and level without leaving severe screen texture?

That cannot be answered by one low-shear number alone.

Low-Shear Body: Preventing Settling and Flow-Out

High pigment loading requires enough low-shear structure to keep the paste stable at rest.

Useful low-shear body helps:

  • Reduce pigment settling
  • Maintain paste on the screen
  • Limit uncontrolled flow-out after printing

But excessive low-shear structure can create:

  • Сложности при сцеживании
  • Poor screen filling
  • High squeegee pressure demand
  • Heavy paste deposit

The goal is not maximum yield stress.

The goal is:

Enough structure for suspension and hold, but low enough resistance for clean screen transfer.

Shear Thinning: Getting High-Solids Paste Through the Screen

During screen passage, the paste experiences much higher shear.

A good acrylic thickener should allow:

High-Solids Paste + High Shear → Lower Apparent Viscosity → Efficient Screen Passage

without losing the ability to recover after transfer.

This shear-thinning behavior is especially important for white paste because:

  • The particle load is high.
  • The screen may be relatively open to allow adequate deposit.
  • The paste can otherwise require excessive printing pressure.

If shear thinning is insufficient, the operator may compensate with higher squeegee pressure, which can increase penetration and hand problems.

Recovery: Holding the White Deposit After Transfer

After the paste leaves the screen, shear drops rapidly.

The complete paste needs sufficient post-transfer hold and enough leveling to form a useful white deposit. A shear-thinning response alone does not establish timed structural recovery. When recovery is part of the explanation, state the preceding shear history, temperature, rest or measurement interval and method; assess the printed deposit separately.

Если восстановление происходит слишком медленно:

  • White paste can spread.
  • Edges can lose definition.
  • More pigment can penetrate into the fabric.
  • Surface opacity can fall.

If recovery is too fast:

  • Это может негативно сказаться на прокачке.
  • Mesh marks can remain visible.
  • Surface texture can become rough.

White-paste rheology therefore requires controlled recovery, not maximum recovery speed.

Leveling vs. Mesh Marks

Opaque white pastes often deposit a relatively thick visible layer.

This makes surface texture easy to see.

Poor leveling can leave:

  • Mesh pattern
  • Ridges
  • Uneven surface gloss
  • Patchy opacity

Too much leveling, however, can increase:

  • Распространение
  • Edge loss
  • Проникновение

The correct thickener should provide enough flow after transfer to smooth the surface without allowing the white deposit to move excessively.

What Does Good Screenability Mean for White Paste?

Good screenability means the paste can:

  • Fill the screen consistently
  • Pass through the openings under normal printing pressure
  • Release cleanly
  • Maintain deposit consistency
  • Avoid rapid blockage

For high-pigment paste, also monitor:

  • Particle / gel residue
  • Drying at the screen
  • Beginning-to-end deposit
  • Cleaning frequency

A paste with excellent opacity but poor running stability is not a production-ready formula.

Screen Mesh, Engraving and Open Area

White opacity often depends partly on the amount of paste deposited.

Screen geometry therefore matters greatly.

Larger openings or deeper engraving can increase deposit, but may also increase:

  • Расход пасты
  • Рука
  • Drying load
  • Risk of edge buildup

Finer screens can improve detail but may be difficult for a highly loaded paste.

Следовательно:

Thickener Rheology + Screen Geometry + Opacity Target

should be optimized together.

Squeegee Pressure, Speed and Stroke Count

Pressure and stroke count can change transferred amount and penetration, but the direction and magnitude depend on the screen, substrate and paste. Measure the deposited amount during the trial rather than assuming that higher pressure always increases useful surface deposit.

This can improve apparent opacity but also increase:

  • Проникновение
  • Polymer deposit
  • Printed-area stiffness
  • Drying / curing demand

During thickener trials, keep:

  • Pressure
  • Speed
  • Angle
  • Stroke count

controlled.

Otherwise one candidate may appear more opaque simply because the machine deposited more paste.

Paste Deposit, Opacity and Add-On

Opaque white performance is strongly linked to deposited pigment mass.

But total deposit should be distinguished from formula concentration.

Estimate deposited ingredients on a mass-per-area basis, using measured wet paste transfer and confirmed ingredient mass fractions:

Estimated deposited constituent (g/m²) = wet paste deposit (g/m²) × constituent mass fraction in the finished paste. Calculate pigment and confirmed binder-polymer input separately. Total nonvolatile matter includes other residues and is not automatically active binder or TiO₂.

A lower-solids paste can create a heavy deposit if screen add-on is high.

A more concentrated paste can still produce a lighter hand if rheology allows lower add-on at the same opacity.

Record paste add-on whenever possible.

Separate Hiding, Deposited Mass and Entrained Air

This proposed diagnostic panel is not an FSX test result or a universal white-paste specification. Use the same fabric lot and a defined print area; include conditioned unprinted pieces to check whether fabric mass or moisture changes distort a dry-add-on result.

QuestionControlled comparisonWhat the result cannot prove alone
Did the candidate simply transfer more paste?Weigh transferred wet paste per printed area; calculate declared pigment and binder inputBetter hiding from a heavier deposit is not proof of better thickener chemistry.
Did hiding improve at comparable pigment deposit?Compare cured coverage and reflectance with matched pigment mass/area, fabric, cure and instrument settingsLightness on one dark fabric is not a universal opacity value.
Is air affecting transfer or pinholes?Split one well-mixed batch; measure density and compare a controlled, composition-preserving deaerated portionDensity change alone does not prove bubble volume if water or solids also changed.
Is the outcome commercially useful?Separately tune each accepted candidate to the same hiding, rubbing and hand requirementsThe lowest deposited mass is not acceptable if durability or screen running fails.

Record lighting, instrument geometry, backing and fabric orientation for optical comparisons. A coating drawdown on black/white panels can support a dispersion investigation, but it is a different substrate test. The published scope of ASTM D2805 concerns coating hiding power; do not describe an adapted textile screen-print check as compliant with that standard without the required procedure and validation.

Chemours’ TiO₂ technical discussion distinguishes scattering efficiency from pigment concentration in coatings. It supports investigating dispersion and particle spacing; its numerical paint limits are not textile recipe targets. For pinholes, compare deposit continuity, screen filling and drying as well as air. BYK’s aqueous-coatings data sheet identifies application-related microfoam as a formulation variable, not proof that every white-print defect needs more defoamer.

Opacity vs. Rheology: Why More Deposit Is Not Always Better

Higher white-paste deposit can increase hiding power up to the useful application range.

But beyond that point, additional deposit can create diminishing benefits and increasing penalties:

  • Harder hand
  • Slower drying
  • Higher binder demand
  • More cracking risk in thick films
  • Более высокая стоимость химикатов

The target is:

A Validated Deposit Window That Meets Opacity, Uniformity, Fastness and Hand Requirements.

Do not maximize paste add-on simply because the shade is white. Repeat near the candidate deposit limits and confirm the intended variation in fabric, transfer and cure before setting a production range.

Binder Demand in High-Pigment Pastes

Determine binder demand for the specific pigment package and cured deposit. Surface area, dispersion, binder chemistry and film formation matter; a TiO₂ mass increase does not define a universal binder-to-pigment ratio. Check dry and wet rubbing at the required opacity and hand before changing binder.

A binder level is qualified only for the tested pigment deposit, fabric and cure conditions.

If binder is too low:

  • Dry rubbing can fall.
  • Wet rubbing can fall.
  • Pigment can release from the surface.

If binder is too high:

  • Hand can become harder.
  • Paste solids increase.
  • Rheology can change.

The correct target is:

A Validated Binder Window for the Required Fastness, Hand, Deposit and Cure Conditions.

Binder–Thickener Compatibility

Binder addition can change acrylic-thickener behavior through:

  • Разбавление
  • Электролиты
  • Поверхностно-активные вещества
  • Взаимодействие полимера и частиц

In a high-solids white paste, binder dosage may be relatively high, making compatibility even more important.

Сравните:

Thickener + Equivalent Water

с:

Thickener + Actual Binder

as a dilution screen, with final paste mass, supplied-product dose, water contribution, pH, preparation and age stated. The binder adds polymer and may also add surfactants, salts or other ingredients, so a difference from water alone does not isolate a chemical or associative mechanism. Where available, use a suitable carrier-matched blank and controlled follow-up comparisons, then verify the complete white paste.

For HASE-type thickeners, binder can also change associative rheology and elasticity.

Pigment Dispersants and Surfactants

High-pigment white dispersions can bring substantial dispersant and surfactant into the paste.

These materials are necessary for:

  • Pigment wetting
  • Particle separation
  • Dispersion stability

but they can also affect:

  • HASE association
  • Пена
  • Вязкость
  • Совместимость связующих веществ

This is why two white pigment dispersions with similar TiO2 content can behave differently with the same acrylic thickener.

Electrolyte Load and Viscosity Retention

High-solids pigment systems can place more ionic stress on anionic acrylic thickeners.

Электролиты могут поступать из:

  • Пигментная дисперсия
  • Связующее вещество
  • Ремонтник
  • Вода
  • Neutralizer counterions

A thickener that produces high water viscosity but loses most of it in the white paste may require a high working dosage and create poor hand.

Therefore, compare:

Initial Viscosity → After White Pigment → After Binder → After Fixer → After Holding

rather than selecting from water efficiency alone.

pH и активация акрилового загустителя

Many acrylic thickeners are pH-responsive.

High-pigment paste can shift pH through:

  • Pigment-dispersion chemistry
  • Связующее вещество
  • Ремонтник
  • Другие вспомогательные средства

Record pH after every major addition during qualification.

Do not increase thickener dosage before confirming that the grade remains inside its useful activation window.

Foam and Microfoam in White Paste

White paste can be visually misleading because microfoam may be difficult to distinguish from an opaque, high-solids matrix.

Entrained air can cause:

  • Density loss
  • Pinholes
  • Uneven deposit
  • Patchy opacity
  • Unstable viscosity readings

High pigment / surfactant levels can also increase foam persistence.

Check paste density or controlled deaeration when opacity or transfer is unexpectedly inconsistent.

Stringing, Elasticity and Poor Screen Release

High viscosity alone does not explain poor release.

A paste can have acceptable viscosity but excessive elasticity.

Filaments and trailing may involve several paste and machine variables. The following are observations to investigate, not proof that HASE association or excessive elasticity caused the defect:

  • Long filaments
  • Trailing
  • Poor snap-off
  • Dirty screen release

High-pigment paste can modify the associative network through binder, dispersant and surfactant changes.

Оцените:

  • Filament dragging
  • Восстановление
  • Выпуск фильма

помимо вязкости.

Holding Stability and Sedimentation

A high-solids white paste should remain sufficiently homogeneous over the actual production holding period.

Запись:

  • Свежая вязкость
  • Held viscosity
  • pH
  • Пена
  • Разделение
  • Осадок
  • Гель / флок

If white pigment settles during holding, the answer is not automatically more thickener.

Also check:

  • Particle dispersion quality
  • Yield behavior
  • Mixing / recirculation
  • Совместимость связующих веществ

Fabric Structure and Surface Coverage

The same white paste can behave differently on:

  • Single jersey
  • Rib
  • Fleece
  • Dense woven fabric
  • Open woven fabric

Textured or bulky fabrics can require more deposit to cover the surface, which can increase hand.

Smooth, dense fabrics may achieve opacity at lower add-on.

Always qualify white paste on the actual commercial substrate.

Printing White on Dark Fabric

White-on-dark printing places the strongest emphasis on hiding power.

К важным переменным относятся:

  • White pigment concentration
  • Particle dispersion
  • Дополнение «Вставить»
  • Surface leveling
  • Fabric color
  • Binder-film uniformity

High-opacity white systems commonly use substantial TiO2 or another opacifying pigment package.

The goal is not simply to create a thicker paste.

The goal is:

Uniform Opaque Deposit at the Lowest Practical Film Build.

Fabric Hand and Printed-Area Stiffness

White and high-pigment prints can feel harder because they can deposit more:

  • Pigment solids
  • Binder solids
  • Thickener polymer

Hand becomes especially important for:

  • T-shirts
  • Lightweight knits
  • Stretch garments

To improve hand, first evaluate:

  1. Thickener working dosage
  2. Validated binder window at measured deposit and cure
  3. Screen add-on
  4. Curing efficiency

Do not reduce binder below the fastness requirement simply to soften the print.

Отверждение и образование пленки связующего вещества

High-pigment white paste requires effective binder-film formation around a large amount of pigment solids.

Under-curing can cause:

  • Poor rubbing
  • Pigment release
  • Weak wash performance

The operator may then respond by adding more binder, which can worsen hand.

Before increasing binder, confirm:

  • Actual curing temperature
  • Residence time
  • Fabric temperature
  • Binder supplier guidance

Do not use one universal curing condition for every binder and white paste.

Build a Pigment-Loading / Rheology Curve

Prepare several high-pigment points across the actual production range.

For each point, record:

  • Pigment-dispersion dosage
  • Конечный pH
  • Low-shear viscosity
  • Higher-shear viscosity
  • Yield / recovery behavior
  • Пена
  • Screenability

Plot:

Pigment Loading → Complete-Paste Rheology

Interpret the combined measurements and screen observations to flag:

  • Too fluid
  • Too structured
  • Persistent filaments or an elastic response measured by an appropriate method
  • Unstable only beyond a certain loading

Use the actual white pigment system rather than assuming all white dispersions behave similarly.

Build a White-Paste Thickener × Binder Matrix

Test AreaLower BinderCurrent BinderHigher Binder
Lower ThickenerТестТестOptional
Current ThickenerТестReferenceTest if fastness requires
Higher ThickenerDiagnosticDiagnosticAvoid unless needed

For each relevant point, evaluate:

  • Viscosity / rheology
  • Screenability
  • Opacity / hiding
  • Дополнение «Вставить»
  • Сухое / влажное протирание
  • Тканевая ручка

The best condition is not the one with the maximum opacity alone.

Select a candidate that meets opacity, fastness and hand at a measured deposit with clean running. The lowest passing point in the matrix is a candidate limit, not a universal minimum; repeat the relevant combinations and check sensitivity to deposit, pigment/binder input, fabric and actual cure before release.

Run a Screenability Test, Not Only a Beaker Test

A high-pigment white-paste candidate should be tested through the actual or representative screen.

Запись:

  • Ease of screen filling
  • Squeegee pressure needed
  • Выпуск фильма
  • Сетчатые отметки
  • Pinholes
  • Beginning-to-end coverage
  • Cleaning frequency

A beaker can show stable viscosity while the machine reveals poor high-shear flow or release.

Screenability is therefore a release criterion, not an optional observation.

Утверждение пробного производства

Take a repeatable laboratory candidate into an authorized production trial. Confirm a working window with allowance for the intended variation rather than adopting one lowest passing laboratory point.

Запись:

  • White / high-pigment product and dosage
  • Thickener grade / dosage
  • Класс связующего вещества / дозировка
  • Комплект фиксаторов / вспомогательных элементов
  • Конечный pH
  • Метод измерения вязкости
  • Вязкость в начале, в середине и в конце пробега
  • Screen / engraving
  • Squeegee pressure / speed / strokes
  • Дополнение «Вставить»
  • Opacity / coverage
  • Mesh marks / pinholes
  • Curing conditions
  • Сухое / влажное протирание
  • Тканевая ручка

Approve a complete white-paste production window, not one viscosity target.

Common High-Pigment / White-Paste Mistakes

1. Assuming White Paste Just Needs Higher Viscosity

Screenability, yield stress, leveling and recovery matter more than one number.

2. Maximizing Thickener Dosage to Keep TiO2 Suspended

Excess polymer can worsen screen release, hand and pumping.

3. Increasing Paste Deposit to Improve Opacity Without Measuring Hand

Higher add-on also increases binder and pigment film mass.

4. Reducing Binder to Soften White Print Before Checking Cure

Fastness may fail if the binder film becomes insufficient.

5. Ignoring Pigment Dispersion Chemistry

Different white dispersions can bring different surfactants and electrolytes.

6. Testing Only Low-Shear Viscosity

High-solids white paste must still pass through the screen under shear.

7. Ignoring Microfoam

Entrained air can create pinholes and apparent opacity variation.

8. Using One Formula for Every Fabric

Bulky knit and smooth woven substrates can require different deposit windows.

Таблица устранения неисправностей

Выявленная проблемаПервые переменные, которые следует проверитьНе делайте поспешных выводов
White paste is too hard to screenHigh-shear rheology, yield stress, thickener dosage, meshMore pressure is the best fix
Opacity is weakPigment concentration, add-on, leveling, penetrationMore thickener automatically increases opacity
White paste settles during holdingYield behavior, dispersion quality, mixingMaximum viscosity is required
Mesh marks remain visibleRecovery / leveling, paste depositHigher recovery is always better
Paste strings during releaseControlled filament and screen-release observations, paste condition, binder/surfactants and separation geometryViscosity alone explains the problem
White print feels hardBinder solids, thickener dosage, add-on, curingBinder must be reduced first
Pinholes appearMicrofoam, screen filling, pigment dispersionThe white pigment concentration is too low
Fastness is weak after reducing binderDelivered binder and pigment mass, actual cure, fabric, conditioning and rubbing methodThickener can replace binder fixation

Общая стоимость эксплуатации

High-pigment and white pastes are expensive not only because of pigment price.

Cost also depends on:

  • White pigment / TiO2 usage
  • Связующее вещество
  • Загуститель
  • Дополнение «Вставить»
  • Скорость работы станка
  • Drying / curing energy
  • Очистка экрана
  • Переработка

Полезной моделью является:

Cost per accepted opaque printed metre = allocated paste-ingredient, preparation, printing, curing, cleaning and rework costs ÷ accepted printed length. Use the same width, opacity/coverage standard and fastness requirement. Include measured add-on in ingredient consumption rather than adding grams or a percentage directly to monetary costs.

A candidate can be more economical only when a controlled trial confirms the relevant benefits below. A claimed water-thickening efficiency does not establish lower white-paste deposit, softer hand or fewer rejects:

  • Lower working dosage
  • Cleaner screen running
  • Lower add-on at the same opacity
  • Softer hand
  • Less rework

Compare cost per acceptable opaque printed meter, not thickener price per kilogram.

Какую информацию следует отправить поставщику?

For useful high-pigment / white-paste matching, provide:

  • White or high-pigment dispersion product
  • Pigment dosage / solids if known
  • Текущий акриловый загуститель / Технический паспорт (TDS)
  • Дозировка загустителя
  • Binder grade / dosage / solids
  • Комплект фиксаторов / вспомогательных элементов
  • Конечный pH
  • Вязкость и полная методика испытаний
  • Плоское или ротационное сито
  • Сетка экрана / гравировка
  • Настройки скребка
  • Paste add-on if measured
  • Fabric type and color
  • Curing conditions
  • Main issue: opacity, screenability, settling, hand or fastness

Компания FSX Chemical может использовать эту информацию посредством Образцы и подбор продукции to define a controlled high-pigment trial.

Обзор Синтетические загустители для текстильной печати, Параметры испытаний загустителей для текстильной печати и Synthetic Thickener for Pigment Printing: How to Choose the Right Grade for related selection logic.

How Should a Mill Select Acrylic Thickener for High-Pigment and White Pastes?

A practical decision chain is:

Define Pigment Solids / Opacity Target → Build Complete-Paste Rheology Curve → Check Yield / Shear Thinning / Recovery → Match Screen Geometry → Measure Add-On → Validate Binder / Cure → Compare Opacity / Fastness / Hand → Approve Production Window

Основные принципы заключаются в следующем:

  1. High-pigment and opaque white pastes are particle-rich systems, so particle crowding and total solids strongly influence rheology.
  2. Titanium dioxide is common in opaque white textile paste, but the actual white pigment package and dispersion chemistry must be tested.
  3. Low-shear stability, high-shear screen passage and controlled recovery are more useful than one maximum viscosity target.
  4. Opacity depends on pigment concentration and deposited mass, but excessive add-on can worsen hand and curing demand.
  5. Binder remains the main pigment-fixation component and should not be reduced below the required fastness level.
  6. The best acrylic thickener is the grade that produces stable high-solids rheology, clean screenability, sufficient opacity and acceptable hand at the lowest practical Total Cost in Use.

Часто задаваемые вопросы

1. Why is white pigment paste harder to thicken than normal pigment paste?

Opaque white pastes can differ in pigment volume, dispersion ingredients and binder input. Those changes can alter suspension stability and flow, so compare the actual formulation. TiO₂ mass percentage alone does not establish particle crowding, stronger interactions or a universal increase in binder demand.

2. Is titanium dioxide always used in white textile pigment printing?

TiO2 is one of the most common opacifying white pigments because of its hiding power, but commercial white systems can use different or combined opacifying pigments.

3. Does white paste need a higher Brookfield viscosity?

Not necessarily. It needs enough low-shear structure for suspension and hold, but also sufficient shear thinning for clean screen passage and leveling.

4. Why does white paste become too difficult to screen?

Possible causes include excessive yield stress, high thickener dosage, particle crowding, insufficient shear thinning, screen geometry or binder/thickener interaction.

5. Why does white paste settle even when viscosity looks high?

Suspension stability depends on low-shear yield behavior, particle dispersion and structure—not only one viscosity reading.

6. Why does more white paste improve opacity but make the print hard?

Higher add-on deposits more pigment, binder and thickener solids, increasing film mass and stiffness.

7. How can I improve opacity without making the print much harder?

Compare pigment dispersion, measured deposit, leveling and the binder/cure window against the required hiding, fastness and hand criteria. Repeat near candidate limits; one low-deposit pass does not establish a robust minimum for other fabrics or operating conditions.

8. Why does white paste show mesh marks?

The paste may recover too quickly or level too slowly after transfer, or the deposit may be too heavy for the current screen/rheology combination.

9. Why do pinholes appear in opaque white printing?

Possible causes include microfoam, poor screen filling, uneven pigment dispersion or insufficient leveling.

10. Should binder be increased when white pigment loading increases?

Binder demand may increase, but the correct level should be determined from pigment/binder ratio, rubbing fastness, hand and curing—not pigment percentage alone.

11. What should be checked besides viscosity?

Check yield behavior, shear thinning, recovery, screenability, add-on, opacity, rubbing fastness, holding stability and fabric hand.

12. What should I send FSX Chemical for white-paste matching?

Send the white pigment product and dosage, thickener, binder, pH, viscosity method, screen, add-on if known, fabric, curing conditions and the main opacity, screenability or hand problem.

Match Acrylic Thickener to High-Pigment and Opaque White Pastes

If your white or high-pigment paste gives good opacity but poor screenability, settles during holding, shows mesh marks, creates a hard hand or requires excessive thickener dosage, FSX Chemical can help structure a controlled high-solids rheology trial.

Чтобы получить полезный технический обзор, отправьте:

  • Your white / high-pigment dispersion product and dosage
  • Pigment solids if available
  • Ваш текущий образец акрилового загустителя, спецификация TDS или протокол анализа COA
  • Дозировка загустителя
  • Binder grade / dosage / solids
  • Fixer / auxiliary system
  • Final paste pH and viscosity test method
  • Сетка экрана / гравировка
  • Squeegee pressure / speed / strokes
  • Paste add-on if available
  • Fabric type and color
  • Curing conditions
  • Current issue: opacity, screenability, settling, hand or rubbing

Начните с Образцы и подбор продукции for a controlled current-vs-candidate evaluation.

Обзор Синтетические загустители для текстильной печати for the current FSX pigment-printing thickener range.

Вы также можете Запросить предложение напрямую от производителя after the suitable high-pigment working window is confirmed or Связаться с компанией FSX Chemical для обсуждения технических вопросов📧 Электронная почта: Service@fsxchemical.com

A good white-paste thickener does not simply make the paste thick. It creates enough low-shear structure to hold a heavy pigment load, enough shear thinning to pass the screen, and enough controlled recovery to maintain opacity without creating excessive film build or a hard fabric hand.

Быстрые ссылки

Быстрый контакт

Отправьте запрос

или

Бесплатные образцы · Ответ в течение 24 часов

Запросы о продукции и техническая поддержка

Отправьте свои требования к продукции

Сообщите название продукта, область применения, количество, пункт назначения, а также предоставьте техническое описание продукта (TDS), фотографию образца или имеющиеся у вас документы. Компания FSX Chemical рассмотрит эту информацию и порекомендует дальнейшие действия для подготовки коммерческого предложения, подбора образца или выбора продукта.

Информация о продукте Название продукта, марка, модель, фото этикетки или данные о продукте текущего поставщика.
Доступные документы TDS, SDS, COA, фотография образца, перечень продукции или данные испытаний.
Детали заказа Предполагаемый объем, упаковка, страна назначения, порт или условия торговли.
Область применения или проблема Процесс печати на текстиле, требования к составу, текущие проблемы или целевые показатели.